Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
| Operation Mode |
ON-OFF |
| Current Rating |
20 Amps |
| Operating Voltage |
5 Volts |
| Contact Type |
Normally Open |
| Connector Type |
Plug In |
| Brand |
Mopar |
| Terminal |
Solder |
| Item dimensions L x W x H |
1 x 1 x 1 inches |
| Circuit Type |
1-way |
| Actuator Type |
Push Button |
| Contact Material |
Metal |
| International Protection Rating |
IP00 |
| Number of Positions |
1 |
| Control Method |
Touch |
| Connectivity Protocol |
X-10 |
| Color |
Regular |
| Unit Count |
1.0 Count |
| Number of Items |
1 |
| Manufacturer |
Mopar |
| Model |
SWITCH |
| Item Weight |
2.01 ounces |
| Product Dimensions |
1 x 1 x 1 inches |
| Item model number |
56031005AB |
| Exterior |
Machined |
| Manufacturer Part Number |
56031005AB |
| OEM Part Number |
56031005AB |
Mopar OEM part that fits your specific vehicle.
Vehicle information
Available fitment details
Listing compatibility notes
- 01 ounces Product Dimensions 1 x 1 x 1 inches Item model number 56031005AB Exterior Machined Manufacturer Part Number 56031005AB OEM Part Number 56031005AB Mopar OEM part that fits your specific vehicle.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this oil pressure in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Verify the referenced part number: 56031005AB.
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.8 / 5
36 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Eric –
if your gauge is moving around this is what you need! genuine mopar only. used on my 98 xj
Steve Brown –
ITS A PROPER PART FOR CHRYSLER
Robert J. Rogers –
This works much more accurately that the aftermarket switch I had in my Wrangler TJ. However, it does not use the round pins for the electrical connection. This contains blades. I could not find a connector, even from the company that sold me the switch. I ended up using small crimp connectors. Not water proof, but this is very high on the engine, so it works OK.
Customer –
Was getting crazy readings on 3 different sensors from local auto stores. So bit the bullet and went MOPAR, expensive yes, but no issues ever since, and no regrets. Get this for oil pressure and get the MOPAR sensor for coolant temp, then forget about sensors and start chasing the real issues on your XJ.
aobaldo r. –
did what it suppose to do much better than other ones
Customer –
This is a great Mopar replacement oil pressure switch. The aftermarket one I purchased at Autozone didn’t work correctly. I should have ordered this Mopar replacement the 1st time for my 1998 Jeep Cherokee XJ.
Braddock –
Worked good always best to go with factory original parts
Thomas Mowdy –
I will always buy Mopar it stopped my oil pressure gauge from going to zero