Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Can be use for motorcycle which the top clamp fork bolts are fitted from the front..
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Can be use for motorcycle which the top clamp fork bolts are fitted from the front.
- Can be use for motorcycle which the top clamp fork bolts are fitted from the front.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this handguards in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.6 / 5
282 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
AG –
Worked well to connect Zeta handguards installed on a Yamaha WR250R with 1 1/8″ bars. Tried the cheap generic handlebar clamps, but could never get them to stay in one place. These, in addition to drilling/tapping the bar ends for threaded inserts, are keeping the hand guards locked in place solid. My only issue with this set is the supplied bolts need to be just a little longer to grab as many threads as the stock setup did in the fork clamps.
Richard Chapman –
Must have upgrade from the bar clamps, the bush guards don’t slip and rotate any more.
jason cook –
Awesome product. Cleans up space on the handlebars and makes hand guards sit even and more rigid. Recommend
Tony P. –
I liked the quality of the mounts, but the bolts are a half inch too short! Prepare to source yourself new bolts or you will strip the threads out of the triples.
S –
I used these to mount LED lights. Worked out great!
Justin Coulter –
Installed on 2018 DRZ400sm. These made my guards so sturdy. Worth the upgrade! Need to leave everything loose until situated or else they won’t go on properly. Took me longer than I’d like to admit before I found that out. Left side had to lose the loop for the brake line, but that isn’t necessary anyway.
J J –
They went on easy. About 5 minutes. On the left side. You either need to swap positions between black signal bracket and silver line support as I did. Or if you don’t have signals on front, use washers to space it out off the line support rod welded on.
Michael Brayn –
I put on the Zeta hand guards and didn’t want it attached on the handle bars, so I bought this bracket and it works perfectly for I wanted to accomplish.
Jimmy B –
I really like these mounts, really makes a strong mount, and you don’t have to mar up your bars or take up room you could use for something else
カズ –
ZETAのハンドルとハンドガードをセットで購入。問題なく付きました。強度もありなかなかカッコいいです。お勧めです！
Jmy101y –
Worked good, so much better than having the stock clamps that come with guards. Clears up Handel bars from on bar clamps! The only thing was that the front brake line holding bracket didn’t fit, so I just zip tied. Was just gonna leave hanging on line, but bro zip tied it Lol. But all in all, so much better than having on bar clamps👍🏽
ゴロテツ –
結果、取り付けることが出来て一安心しました。セロー250(2018年)、ハンドガードは多分ジータのだと思うんですが分からずで迷ってましたが、なんとなくいけそうな気がしたので思い切って買いました(なんせお高いので)
WR250R –
WR250のハンドルガードにピッタリでした。