Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Warning: These parts must be installed by a qualified technician. If these parts are installed incorrectly, serious injury or death may occur.
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this gas regulators in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.5 / 5
119 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Diane McClain –
My Acetylene regulator put full tank pressure in my line and wouldn’t regulate no matter how much I turned the adjusting rod. So I installed this kit and now my regulator works fine. Its fairly easy to do and there are repair videos you can fine on the internet.
Customer –
would like to suggest the repair kit be offered with or without the bottle adapters
Bert Gullett –
I use a Victor oxy/acetylene rig, only ocassionally, and I recently had to exchange my empty gas bottles for full ones.I expected everything to work normally, but was surprised to see that the acetylene regulator was leaking from the high side to the low side, and would not maintain a steady pressure of 5-6 psi, it would continiue to rise up towards 15 psi, which is an unsafe operating pressure for acetylene, it becomes unstable at 15 psi and above, and can send unwary welders to the promised land. NOW, THE FIX….I checked a couple of youtube videos, and decided a regulator rebuild kit was the way to go. Delivery was quick, and disassemble/ remove/reinstall was easy and fixed the problem.If you suspect tour equipment has an issue, get it repaired immediately before using it again!
Mister B –
Everything necessary is included and the repair only takes a few minutes.
John –
Fits and works
Paul Rolih –
Using my own parts names. Using to rebuild a 40-year-old regulator. My plunger has a straight stem with the seal recessed. The stem nut had a small shoulder that went into recess to contact seal. New stem has a slight tapered section, almost like a funnel. It would contact the shoulder in the stem nut and leak. Carefully drilled shoulder out so stem nut was flat and able to contact new style stem seal. Then it worked. I don’t believe it was a design flaw, just change in design over time. However, bought this one (higher priced) hoping it was factory original. It is made in China like cheaper version. COO not listed in product description.
Customer –
Installed easily and no leaks!
trj147 –
worked great. saved $60 over buying a new reg.