Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Package:
STATOR *1
GASKET *1
Manufacturer Part: 3HN-85510-10-00
Replacement Part: 3GD-15451-00-00
This Accessories fits the following models:
2001 Yamaha Warrior 350 YFM350X
2000 Yamaha Warrior 350 YFM350X
1999 Yamaha Warrior 350 YFM350X
1998 Yamaha Warrior 350 YFM350X
1997 Yamaha Warrior 350 YFM350X
1996 Yamaha Warrior 350 YFM350X
1995 Yamaha Big Bear 350
1996 Yamaha Big Bear 350
1997 Yamaha Big Bear 350
1993 Yamaha Kodiak 400
1994 Yamaha Kodiak 400
1995 Yamaha Kodiak 400
1996 Yamaha Kodiak 400
1997 Yamaha Kodiak 400
1998 Yamaha Kodiak 400
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this gaskets in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
3.7 / 5
31 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Brianna Young –
The red and white wires were not correct. Took 30 seconds to swap the wires in the connector and then everything worked great.If you have no spark or you have spark but the timing is wrong, try swapping the red and white wires.
Rusty R. –
The red and white wires are wired wrong. Had to depin them and switch them around.
Glen Langley –
This stator does not have the wire connectors that are required for a 1995 yamaha worrior yfm350. This machine was one listed as a suitable recipient of this item. I ended up cutting connectors and adding my own according to the wiring diagram. Didn’t want to return it as it took too long for it to arrive in the first place.
Daran Jex –
Looks good but tested wrong out of the boxThe company was great to deal with and refunded my money after some testing and emails back forthIt was super inconvenientI will buy from this company again
Bill Hanley –
After install I got spark however the 4 wheeler didn’t start. I had to switch one of the two wire connector wires around. I only knew this because of others reviews. once I did that it fired right up. I wasn’t able to get the wires out of the connector so I cut them and cross crossed them using butt connectors. I tested this theory with alligator clips and test leads before I cut them.
brad –
Does not work.Broken right out of the box.98 warrior 350 stator
jm –
ne pas acheté,ne fonctionne pas
Ben –
I like how product fit well and bolted right on would definitely purchase again
Jeff Wilson –
It works perfectly thank you
Kole Engle –
The wiring is backwards so when you replace yours you have depin the connect and white wires goes to red and red wire goes to white. The colors are wired wrong. Don’t know by but it only starts and runs that way. If you’re having trouble with it not starting that’s why.
Kane Sibley –
Works great once i switched the wires around good strong spark atv fired right up soon as i switched the wires unlock the pins and remove from connector switch white and red. Need a small pick to unlock the pins by little white plastic tab that locks the pin into the connector.