Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Product Description
RV STEPS WITH HANDRAILS.
- Up to 400LBs load bearing capacity: A square tube with a side length of 1inch was used as the support brackets, fully welded together. The step panel thickness is up to 2mm, with triangular bars to provide extra braced force to enhance the stability of the product. We ourselves have been using this rv stair railing for a long time, with a load-bearing capacity of no less than 400 pounds.
- Better stability entering and exiting RV: Provides a lot of additional stability and makes entering and exiting travel trailer much safer then the standard factory steps. Makes loading and unloading the trailer a breeze and keeps balance when entering and exiting even with hands full. Using this in place of your built in RV steps to give more step out platform and safer stairs width. if you’re mostly location stable perfect for your permanently parked travel trailers.
- RV step stool with handrail on both sides: Comparing with others, we made some improvements in the design of handrails. First, each handrail can be disassembled into three parts, the grab bars are screw threads connected, not only does the strength not change, but also can be disassembled to store easier. Second, we designed handrails on both sides of the stairs. Third, use shrink tube to fix each grab bar against the step, then use strong screw to fix from its bottom. You could check and test how they work.
CORRECT STEPS MAKE ASSEMBLING MUCH EASIER.
- Step 1: Prepare the two brackets to support the step panel and the side with four holes outwards.
- Step 2: Install the second step panel and back triangular bars . Please get ALL FOUR screws locked then tighten them one by one together.
- Step 3: Install the first step and the triangular support bar to connect the second panel side.
- Step 4: Screw the detachable handles to connect the grab bars and install them on both sides. Surely, you don’t have to install the grab bar, just one side or both sides is your choice.
- Step 5: Lay down the non-slip step mats. Mats front with grooves to not collect water and back with pv for non-slip and waterproof purposes.
- FOR MORE INSTALLATION DETAILS, PLEASE CHECK ATTACHED PDF ON LISTING PAGE.
BRING CONVENIENCE AND SECURITY TO DAILY LIFE.
- Product Weight: 28LBS
- Loading Capacity: 400LBS
- Step Panel: 2mm thickness iron
- Support Brackets: 1“ square tube
- Grab Bars: φ28mm, 1.2mm thickness
- Package Content: 1* Screw wrench, 1* Hex wrench, 2* Non-skid step mats, 2* Support brackets, 2* Detachable grab bars, 2* Step panels,4 * Triangular bars, 4* M8*15mm screws, 14*M8 Nuts; 14* M8*40mm screws
Two Detachable Handles
Two sides handrails are screw thread connected, easy to assemble for daily use and convenient to disassemble for storing.
Four Widen Supported Legs
The legs touched the ground are widened, make the brackets more stable. With pre-drilled hole for fixing on the ground.
Four Expansion Screws
As an option, we included four expansion screws to fix the widened supported legs onto ground, will be more stable.
Two Non-slip Step Mats
Include 2PCS 25.6″L*9.8″W step mats. Front with grooves to not collect water and back with pv for non-slip and waterproof purposes.
Daniel M. Goen –
Absolute garbage. Rusted anywhere things go together. Wether it’s threaded or not. Top step had paint rusted thru ( painting after it’s rusted) Top was also dented. I tried to oil parts where the rust was, but it became clear the thing is just crap. Extremely light weight. Don’t buy. I’ll be going for some 2×8’s and build one myself. This is a bad joke, stay away like it’s the plague
Customer –
Generally happy with this product, but was frustrated by only being able to assemble one of the two handrails.We needed two steps for guests to get over a short wall. This unit is a good height for that.These are *not* expensively made or heavy-duty. The treads are rather narrow, but feel sturdy enough. The handrails are assembled by attaching two straight pieces of pipe to threaded connections on either side of a curved pipe. The threads are very fine, so be careful not to cross-thread them. On delivery, ours came coated with a decent layer of rust, so we used a fine wire brush to clean the connections.One end of one of the curved sections was ever so slightly out-of-round (see photo) – very subtle. It appears it was damaged during shipping, but we didn’t notice until we were trying to screw the pieces together. Between the fine threads and the out-of-round, it was impossible to complete the assembly.Because of the hassle involved with returning the stairs, we’ve decided to use them with only one rail. [We’d rather have two, so if the vendor reads this I hope they’ll send us replacement parts.]
Phyllis Smith –
use it at end of ramp
Customer –
Very sturdy
Kay –
Happy customer well made, sturdy and wide steps
Jeannette –
Did the job
Nick Willems –
Perfect size for what I needed. Fast shipping, good quality. Thanks.
Anniehoney –
I bought these steps because of the double hand railings. They are the perfect size for my camper and the steps are not too steep for my bad knees. But the handles are wobbly and I thought there was grip tape and there wasn’t. I did buy glow in the dark grip tape so that is all good. But haven’t figured out how to fix the wobbly handles. I didn’t send the steps back because they are exactly what I need for my camper.
Mater5981 –
These steps were easy to assemble and use. Installed at a screen porch entrance for my grandmother who needed hand rails. Spent $100 instead of much more than to have a rail installed by handyman. Highly recommend