Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
| Brand | Qasim |
|---|---|
| Color | White |
| Specific Uses For Product | Head Lights |
| Vehicle Service Type | Car |
| Special Feature | High Beam |
| Wattage | 12 watts |
| Auto Part Position | Front |
| Lens Color | White |
| Lens Material | Silica Gel |
| UPC | 798881238017 |
| Manufacturer | Qasim |
| Item Weight | 0.01 ounces |
| Package Dimensions | 6.02 x 4.8 x 1.06 inches |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | QAAE0007-120MM-W |
| Special Features | High Beam |
| Mirror Lighting Type | automotive-exterior-headlight-bulbs |
Product Description
Features:
*Super bright COB led chips!!! The COB LED lighting source are much uniformer and two times brighter, and they do not look like “beads” any more.
*Compared with traditional CCFL, COB LED has many advantages, such as: energy-saving, fast response, long lasting, no-flicker and no-blind spots.
*COB LEDs make the light look like CCFL tube light, smooth and soft, very cool.
*High quality and raw material. Elaborate design, good structure, waterproof.
*Easy to installation, plug and play style, just need to connect the wires with the power.
COB led Chip
COB LED Chip, bright but not harsh, good waterproof performance.
Transparent Plastic Shell
With Plastic Shell, the light will be softer and not dazzling.
3M Self-adhesive
With 3M Tape, easy to Install, no drilling holes and openings.
Constant IC Driver
Constant IC Driver makes the voltage more stable.
Plastic Cover
There are 3 buckles on the plastic shell for better fixation.
Package Box
Beautifully packaged box for better protection of the halos.
Widely Application: Daytime running light, high beam, turn light, dipped beam, width lamp, fog lamp, loudspeaker decorative light etc.
>>>Manually measured dimensions<<<
Note:
- Please carefully measure the size of your car light before purchasing.
- Manually measure the size, there may be an error of 1-3 mm, please understand.
Anthony Bariana –
I purchased these a while back but have only had them installed maybe a month. I did a full projector retrofit in my headlights and used these as halo DRL lights. after about a month installed one of them is non-functional. Now to fix it I will have to completely disassemble both headlights again as I plan to replace these with a quality product regardless of the cost. Given the work and risk involved in taking apart headlights and now having to do it a second time really sucks. I should have known better for something only priced at a $10 price point. No matter how much you save on these, in the long run at least in my case it was not worth the savings because of the amount of time and work involved in now correcting it.
M.Kumar –
Very Good !! Thanks 🙂
Lupo Grigio –
Ok, to be fair the new headlights, flog lights, fog light grills, bull bar, brush guard and winch add a whole lot of carector, but these blue ring lights really add a nice touch. I wired mine in parallel with the fog lamps. They are surprisingly bright.To mount these where I wanted I designed and 3d printed a clip that fits right into the honeycomb grill of this era of subaru. Works like a charm. I’ve off roaded, hill climbed, gone on the beach, they have not fallen out, nor have the rings come unglued.I have noticed a decrease in people pulling right out in front of me. The extra ring lights give people just enough pause to re-consider doing something stupid.
Richard Lathrop –
Super bright but would not shut off completely. Since this would drain my battery I either had to return them or find a fix. After hours of research and troubleshooting I discovered that my car (2007 Porsche Cayman) has a constant small amperage going to every light looking for a open circuit indicating a burnt out bulb. This is not enough to energize a filament type light, but enough for these led’s to light dimly. So I fixed it with a 100 ohm current limiting resistor between the hot and neutral wires. This slightly cut the brightness down when on but solved the problem.
Ben F. –
Bought these to use for a light under my milling machine. They work grate. One not do not try cut out the little black power filter. They don’t work without this and will just flash
luc decoutere –
wordt gebruikt als extra verlichting bij mijn boormachine. héél goede lichtopbrengst !
pouet-pouet –
Ultra lumineux, limite aveuglant.. belle couleur blanche.Les fils possèdent une connexion rapide, il faut tester dans le temps.Ne pas oublier de les coller sur le phare avec de la colle époxy. Et non avec le scotch 3m inclus sur l’anneau…
Nicola –
Montati su scooter 50 cc. Fanno tantissima luce e sono belli da vedere. Basta pulire bene la carena e il bi-adesivo in dotazione funziona molto bene senza utilizzo di colle o silicone.
David Houck –
The Qasim 1 Pair Red 63SMD 80MM Halo Rings Car Angel Eyes DRL Fog Lights bring a bold, modern look to your vehicle! 🌟 These COB LED lights provide a vibrant red glow, making your car stand out on the road, while the 12V-24V compatibility ensures versatility for different vehicle types. With a durable cover and easy installation, these fog lights are perfect for adding both style and functionality to your ride. Whether you want a unique look or better visibility, these Halo Rings are a great upgrade for any car! 🔥🚘
Michael Lugo –
Wired this into my 3D printer. Great quality for a great price
T. Shoup –
I bought these 100mm ring lights to put over the quill on a milling machine to provide better illumination of the work piece. The dimensions for ID and OD are perfectly accurate (88mm ID, 103mm OD). They are rated for 12 or 24V use but I found I could run them down to 10.3 volts before they flickered. Using a 9V/800mA wall wart (>12V open circuit), I found these lights worked just fine and only pulled the wall wart down to 11.5V. Not mentioned in the product description is a self-adhesive strip on the back of the LED chip-on-board (COB) tape.
Customer –
I use these as the router light for my CNC machine. Works great! Wires are fragile so be careful when plugging/unplugging.
Stephen M. Keener –
Work great as lighting for my FLSUN SR.