Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Brand: PlastiKote
| Manufacturer |
PlastiKote |
| Brand |
PlastiKote |
| Item Weight |
0.01 ounces |
| Product Dimensions |
10 x 2.5 x 2.5 inches |
| Item model number |
264 |
| Is Discontinued By Manufacturer |
No |
| Manufacturer Part Number |
264 |
PlastiKote has you covered for your automotive paint, specialty paint, automotive touch up and scratch repair needs!
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this bed liners in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.2 / 5
312 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Reader –
This product is designed to touch up undercoating. I use it as a protective coating over painted surfaces that are exposed to weather, and it works great. It is great for tractor or off-road vehicle floorboards – it prevents rust and gives you a surface with traction even when wet. I use it for coating metal parts that will go under my Kubota RTV, as well as protecting the front guard.
boardhead –
I used up about 1/4 of this stuff , following the instructions all the way. After 1/4 can useage, the can began to quit spraying normally and began spraying in fits and starts. Soon, nothing woud come out, and the instructions stated not to attempt to clean out the spray nozzle with anything. I couldn’t finish my project with this material. IT CAN’T BE RETURNED – due to Amazon’s HAZARDOUS MATERIAL POLICY ! I get it, but it became just a $10 waste. Don’t buy it !! Just go to HF and get their $6.50 stuff, it works great with a regular nozzle and never gave me a bit of trouble – same quality of material, but IT WORKS ! Adding my fuel cost to go the 90 miles to and from HF – this was a loss for me. This situation sucks – no refund available.UPDATE: Unsatisfied, I was able to recover my expenses from the Manufacturer through their Customer Service Department. After providing my order history and proof of delivery, I received a full refund. If you need to do this, I suggest maintaining a courteous and patient attitude. I also purchased the truck bed material I needed from Harbor Freight. The HF product may not have quite as nice a final finish, but it is easy to use and the spraying system is very satisfactory. It works !
Matthew –
I’ve found that on certain applications this peels off very easily. I could be lack of skill on my part, but the bottle specifically states it should work for my applications. Was sold on this by the company who sold me my cheap metal bumpers for my Jeep- for that use, it does not work at all, I would recommend against that entire line of thinking and get better bumpers. I’ve used it to coat several other things with varying degrees of success.
Dan –
I used it on a set of step boards for my K5. I first tried some rustoleum and it did not work very well and I did not like the look or texture. After watching some utube vids I went with PlastiKote. I thought it was going to be a little harder after it dried, kind of like linex. But overall it was good, I probably would use it again for DIY things. If I had the money I would have had it linex.
Helpful Reviewer –
One can was just enough to coat the inside of the wheel wells on my truck. I did about 3 heavy passes on each well and by the last coat on the last wheel the can was spitting out the last of what it had. Liner is holding up well and looks great once clean.
Trizzy6 –
I watched a youtube video on spray can bedliners and thi s was the top one. I used it on my running boards which has held up very well in Missouri’s winter. It’s been on for about 5 months now and it still looks good when the truck is clean. Also used it on my cheap cold air intake, also from amazon, and it makes it look so much better. 10 outta 10 for a spray can bed liner. Just make sure you sand and clean whatever surface your painting. I dont know how it will actually hold up as a bed liner but if your looking for the rugged black look this will do
David Heumann –
Ok, so full disclosure, I used this to spray on a 3D printed helmet to add some texture, not in a truck bed. That being said, it worked amazing on the helmets, so I am positive it will work as intended on a truck bed!It sprays super clean with no clogging of the spray nozzle. The texture is perfect, not too bumpy, not too smooth, and it dries surprisingly fast as well. Once dry this product is tough! No dings and hard enough that a cat couldn’t scratch it, if you are in to that sort of thing…Anyways, I highly recommend this truck bed liner, and I will be buying more for future projects!
dean –
I’ve bought this before and it works perfect my only complaint I have is the tops are broken on all 3 I purchased I’m able to make it work but the trigger sure does help keep the hands clean maybe next time use a little shipping cushion so more customers don’t end up with the same inconvenience