Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Car radio touch screen digitizer fits for Toyota Highlander Entune 2.0 2014 2015 2016 2017 2018 2019.
Used to fix car touch screen that is: damaged, unresponsive, frozen, scratch / scratched, crack / cracked, delamination, dead pixels, or the polarized protection is wearing off etc…
Size: 8 inch (185*111mm).
View Area: 176.64*99.36 mm.
Thickness: 1.3mm.
Length of FPC (flexible print circuit) / ribbon cable connector: 46.5mm.
Working voltage: 5V.
Interface: 8-pins.
Special feature: Support Can-Bus.
Main material: Glass.
Type: Resistive touch screen.
Compatible with the following vehicles:
Fit for Toyota Highlander 8.0-inch Entune 2.0 radio 2014 – 2019.
Compatible with the following LCD display Part Number (found on back of LCD upon disassembly):
LA080WV2 (TD)(01)
LA080WV2 (TD)(03)
Attention:
1.Installation instructions and tools are not included in this package/order.
2.It is only a touch glass panel, not including a LCD display / entire head unit.
3.Please check the exact dimensions of the touch screen before buying to make sure that it fits for your device. If there is any question/problem, please feel free to contact us.
4.There is a layer of protective film on each surface of the panel. Please remove the protective films before installing it.
Package includes:
1x Touchscreen digitizer
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Touch screen digitizer only fit for 14-19 Toyota Highlander touch screen radio that has faceplate ID starting with '5', such as 57061, 57063, 57064, 510160, 510390, 510179, 510180 Touchscreen is a perfect fitment for repairing radio touch screen that is unresponsive, frozen, broken, faded, cracked, shattered, scratched, delaminated, bubbled, dented, worn digitizer etc.
- High touch sensitive and precision, high stability; easy to install, no programming needed Compatible with P/N: LA080WV2 (TD)(01), LA080WV2 (TD)(03), 86140-0E051, 86100-0E251, 86100-0E250, 86804-0E110, 86100-0E293, 86100-0E300, 86100-0E303, 86100-0E291, 86100-0E301 and many more 8.
- Installation manual and tools not included in the order Car radio touch screen digitizer fits for Toyota Highlander Entune 2.
- Compatible with the following vehicles: Fit for Toyota Highlander 8.
- Compatible with the following LCD display Part Number (found on back of LCD upon disassembly): LA080WV2 (TD)(01) LA080WV2 (TD)(03) Attention: 1.
- Please check the exact dimensions of the touch screen before buying to make sure that it fits for your device.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this radio accessories in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.0 / 5
49 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
JNL –
Very important note, this kit does come with double sided tape strips (but it will be underneath the digitizer in the case). So no need to buy double-sided tape separately and then cut into thin strips. With no previous experience, the job takes about two hours, could probably be done in 30 minutes after doing it once. Performance of this digitizer screen is at least as good as the factory original. Far cheaper doing myself that then at the dealership or audio shop. And as others have said, shame on Toyota for not being able to fixe cracked digitizers at the dealership and only offer multi-thousand dollar replacements of the entire radio/navigation unit.
Susan Vail –
I was quoted almost 6 thousand dollars at Saint John Toyota to fix my touchscreen. The whole unit is replaced they don’t just replace the screen. We ordered this screen and the tools and within one and a half hours with help of you tube the screen was successfully replace.
jesus –
It was so easy to handle very easy to install and works so smooth
Customer –
Installed this replacement digitizer and it worked well for a week and then stopped. None of the buttons worked. Had to install the old one as at least some of the buttons worked with it.
Justin Brown –
When installed correctly it works as promised. Relatively simple to install, whole process less than an hour and saves significant money doing it yourself.
Eva W –
I learn how to replace it on YouTube and spend about 3 hours to finish the work.
Rene Plante –
I went on youtube a viewed a video on how to remove the radio and replace the touch screen. I had purchased the tools, very inexpensive. I then removed the trim and air vents and the radio bolts. I pulled out the radio and had 4 colored sharpies that I marked each plug male and female so I would know for sure what to plug back in on installation. I also used a tube of adhesive to touch on the end of my small phillips head screwdriver so it was easier to reinstall the small screws in tight places. I also had a long magnet for retrieving any small screws that fell down in the radio. All went well, saved me $1800, the cost Toyota wanted. Good product and great value.
Rob –
Screen dose not turn on
Juliana I DeWild –
Easy install, works great 2017 highlander, 510179.
DORIS DORVAL –
2017 highlander worked perfectly! The installation is not simple unless you work with electronics regularly. Toyota can only sell the screen with the stereo as an assembly for around $7300.
Moe –
Just installed it took me about 40mins and its as good as the original. Thank you for having this!
Sassynsweet –
Great item. Had instructions for installing the glass. Works great.
Vanilla Sound –
Perfect. my customer was extremely happy with the repair.