Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Replacement motor is a direct fit for all QTP Electric Cut Outs. Genuine QTEC motor assembly
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Genuine QTEC Motor Assembly Direct fit for all QTEC Cut Outs, Includes: (1) Motor Assy.
- (2) Motor Plate Screws (1) Coupler Replacement motor is a direct fit for all QTP Electric Cut Outs.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this gear kit in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
3.6 / 5
59 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
David Bell –
I have had 2 older motors that both bit the dust. After opening the motors after failure, it is easy to spot the culprit. Gear teeth fail due to over torque. Over torque occurs because you must hold the relay control switch until fully open or closed, and listen for the change in exhaust note. If you hold it too long, it puts excess torque on the motor and gears.These new motors have a unibody aluminum cover (cnc machined from cast billet). I am not sure if they are upgrading the gears or limiting the over torque, but at least they are updating the design and showing improvements.Request to QTP… Please consider offering a quick action alternative (like in the Z06 Vette). I really don’t like holding the relay switch for 10 seconds every time I open/close the cutouts…. And it’s easy to see that it tears up the gears. Even a cable driven system with a lever would be nice (no motor at all).
Jj –
Works
Bobby Jackson –
Exact replacement for my exhaust cut out.
Rob –
The motor should last longer than 1 year.
Customer –
It works!
Ryan Lee –
Motor doesn’t last long, burns out to easy. The old motor it difficult to get loose and the cheap allen screws strip out. Can’t do anything with it. QTP had a good idea of a product but needs to step up & try a little more quality. The motor could use a proximity switch to shut itself off or at lease an indicator light when fully open or closed to keep from burning up
Dan –
Motor came out of the box defective. I have an existing cutout already installed so this should have been an easy, direct replacement. I plugged it in to test the unit before actually installing it and the motor was struggling even without being connecting to the actual mechanical valve. Sent back and awaiting a refund.