Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Item Description
Item Description:
Wiring:
- Red wire – to contact switch 12V+
- Black wire to – ground – 12V-
- Two white wires – in parallel wiring
Time relay with accuracy from 0 to 20 seconds.
Dimensions:
- Length – 40 mm
- Width – 27 mm
- Height – 21 mm
Power supply: 12V DC – Has protection against reverse supply voltage.
- 12V+ red wire
- 12V- black Wire
Output:
- Normally open contact – NO – 20A/12V – wired with two white wires
- Normally closed contact – NC -10A/12V – not soldered to front lights switch
Time is adjusted by trimmer.
Principle of work:
When power is on, the delay time starts, the LED diode lights. When the set time ends, the relay is activated, and output NO contact is closed, NC contact is open until the power is cut off. By restarting power supply – the cycle repeats. The device has a plastic box, as seen in the picture.
It can be used, for example, for the delay on of car lights. When the ignition is started – the timer will wait (1-20/ 150 / 240 / 480 / 1200 secs) and then will start the front lights to save the car battery. When the ignition is off – the lights will cut off immediately. The timer needs to receive 12V from the contact key, and the output should be wired to the front lights switch.
Package contents:
- Mini Time Relay
- Instruction for use and wiring diagram.
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Compact and Versatile Design: With dimensions of 40mm x 27mm x 21mm, our time relay is small and adaptable, fitting seamlessly into various setups without taking up unnecessary space.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this time delay in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
Reviews below were submitted through this store.
Reviews
There are no reviews yet.