Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Brand: Metra
| Brand |
Metra |
| Item dimensions L x W x H |
7.3 x 15.4 x 3.3 inches |
| Item Weight |
6.4 ounces |
| Connector Type |
Iso, Spade, Ring |
| Manufacturer |
Metra Electronics |
| UPC |
086429078455 |
| Global Trade Identification Number |
00086429078455 |
| Product Dimensions |
7.3 x 15.4 x 3.3 inches |
| Country of Origin |
USA |
| Item model number |
99-6504 |
| Is Discontinued By Manufacturer |
No |
| Warranty |
1 Yr Limited |
| Weight |
0.42 Pounds |
Specially Designed to ISO Mount Radios. Comes with Under Radio CD Jewel Case Pocket. Instruction Manual and All Necessary Hardware to Install Aftermarket Radio. High Grade ABS Plastic with Factory Texturing.
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this dashboards in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.2 / 5
1,129 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
A. K. –
I just installed this in my 2004 Jeep Grand Cherokee with a . The JVC stereo fit the Metra 99-6504 perfectly, and the entire installation was completed in less than 2-hours, start to finish. This dash kit perfectly matches the stock Cherokee trim, and I couldn’t be more pleased with the outcome.A NOTE TO THOSE SAYING THIS KIT DID NOT FIT THEIR AFTERMARKET STEREO:When I first opened this dash kit I was shocked to discover that my JVC head unit would not slide into the DIN opening – it wasn’t even close. Then, after researching a little more, I realized this is an ISO only mount. BE AWARE that this kit will NOT allow for the “slide in” mounting style with your stereo’s mounting sleeve. An ISO only mount means you must install the stereo from the REAR of the dash kit (before mounting it into the dash), with the side mounting brackets and screws (I had to buy the screws separately at Home Depot). You should NOT have to dremel or reshape your kit!Also, keep in mind that these types of dash kits typically require the REMOVAL of the trim bezel on your aftermarket stereo. The trim bezel is often times pre-installed by the manufacturer, which adds to the confusion. If you do not remove the stereo’s trim bezel – it will not fit in an ISO mount. On my JVC X50BT, there was a thin trim ring on the face of the head unit that just popped right off. Once I figured out the bezel issue, and the side brackets, the install was a breeze. One more thing, you’ll need a few M5x8mm screws (not included) to mount the JVC stereo in an ISO manner.Check my uploaded photos to see what a proper install looks like with an ISO only mount. I hope this helps solve the problems/confusion some others were having regarding the fit of this kit.
Micah –
As noted in another review, this is an ISO mount, not a DIN style mount. The stereo slides in from behind and any cages or mounting adapters your stereo came with will not be used. Since the stereo face sits roughly flush with the mounting bracket, it makes for a much cleaner look, so this is what I wanted. It makes changing out the stereo a bit harder since you have to remove the whole bracket instead of just sliding the stereo out, but I change my stereo out so infrequently and the Jeep dash disassembles so easily, I figured the look outweighed the convenience.The bracket fit my ’04 Jeep Wrangler perfectly. The side brackets that mount the stereo to face are oddly attached, they rely on the stereo itself to hold them in place. It seems a little flimsy, but it does the job. There are no included screws, so hopefully you have some lying around. I don’t know the standard sizes, but my stereo had the sizes stamped in the casing.What didn’t fit perfectly was the stereo itself, however. The corners of the bracket opening are slightly rounded and my older Clarion stereo has a much more squared face-plate. I had to file the corners square just to get the face through the opening, and even after that the opening was tight enough that the I couldn’t remove the faceplate from the stereo once installed. There’s enough extra material around the opening on the bracket that I was able to file it a bit larger in order to get the necessary clearance. After that little bit of modification, it fit perfectly.The tray, the main reason I bought this adapter, is pretty slim. It just barely fits my 5th gen iPod classic with its sleeve if I stick it in sideways. The plastic gives a little bit, and I’m guessing that’s intentional to help grip what’s shoved in there. The plastic is pretty smooth, so anything that doesn’t “wedge” itself in would probably slide right out the first time you took off from a stop. My smartphone is too thick to fit, but it does have a physical keyboard so it’s a tad bit thicker than most smartphones. Additionally, the tray has several pre-cut holes in the back. If you have a stereo with a rear USB or auxiliary input, you could easily run your cabling out through the tray. You could also easily lose any small USB drives through those same holes, so be careful.Final verdict: it looks great installed with a bit of modification depending on your stereo, and you may or may not be able to fit something useful in the tray.
Some Guy –
I have installed aftermarket stereo units in cars before but this is the first time I purchased a mounting kit that was specifically made for my vehicle. With a few modifications it fit perfectly. I have a Sony head unit and with the removal of a few of the plastic trim pieces the Metra dash kit perfectly leaving no gaps or spaces and looks very nice. I also purchased the Metra wiring adapter for my vehicle and from start to finish I was done in about 2 hours. I took the time to solder the wiring adapter to my Sony unit as well as use heat shrink on the wiring for a good solid trouble free install and after I figured out that I needed to remove a couple of pieces off my Sony unit this allowed me to connect my unit and mount it in the dash very easily.
JAS32 –
This faceplate adapter features a unique storage slot below the radio although it is fairly small to be of much use. It will hold a naked smart phone or one with a thin cover, or maybe a CD jewel box but not much more. Just make sure you do not slide anything small towards the back as it will be quite difficult to retrieve.To use this adapter, you have to remove included trim plate and metal bracket that comes with the aftermarket radio. The radio (with these parts removed) can be mounted to this adapter with the provided screws. I added a rigid foam pad at the bottom prior to mounting so as the weight of the radio is resting on the foam pad and not just on the screws and the adapter. I thought the adapter was not rigid enough to hold the weight of the radio over time, particularly in a vehicle environment.Also, please be careful when using a radio with a flip down face. Since the front face of the radio sits almost flush to the front face of the adapter, you may not have enough clearance for the face to open forward.Overall, the adapter looks great, the grain on the plastic face matches the interior of the vehicle quite well.
David –
Recomiendo ampliamente este producto para la instalación de autoestereo en una Jeep Liberty 2004, trae las instrucciones claras, lo adapte a un autoestereo Pionner adquirido aquí mismo, la instalación fue muy sencilla, como recomendación pueden auxiliarse de algunos vídeos de YouTube
Kyros –
realmente recomiendo este kit, queda muy bien, lo adquiri para una jeep liberty 2002 instalando un Pioneer DEH-X4850BT adquirido aqui mismo, basicamente utilize este kit junto con el harness Metra 70-6502, para asi no tener que cortar los cables del estereo original, y fue muy sencillo, el harnes solo tuve que juntar los cables con su color correspondiente, y ademas de eso deberan conseguir un adaptador para la antena, y basicamente es todo lo que necesitan ademas de un desarmador de estrella.durante la instalacion tuve mis dudas, ya que tuve que quitarle una vista al estereo pionner, ademas de la caja metalica de seguridad entonces basicamente el estereo queda fijo solamente por las palancas de plastico de los lados, tuve mis dudas respecto a eso y me vi tentado a devolverlo, pero sin embargo decidi darle una oportunidad y al ver como quedo, pues quede mas que satisfecho.realmente se ve bien y si compran el harnes Metra 70-6502 y un adaptador de antena no tendran ningun problema en instalarlo ustedes mismos (siempre y cuando vayan a cambiar el estereo original y no hayan nunca cortado los cables originales)
Andy Skuse –
Thanks to A.K. for his description of the ISO install method! My Boss 508UAB deck had a metal sheath around it, and at first I thought this dash kit was the wrong model because the deck did not slide in from the front. But after reading A.K.’s instructions for an ISO install, I removed the front bezel and the metal sheath from the deck, then with firm pressure I pushed the deck into the opening from the rear of the dash kit. The fit is a bit tight, and the thin bezel over the CD slot bent downward by a tiny amount, but the deck did fit flush with the opening of the dash kit and the holes on the 2 plastic brackets that came with the dash kit lined up properly with the screw holes on the deck (see pics). My deck did not come with any screws to bolt the 2 plastic brackets in place but I’m sure I can find some in my workshop or at Home Depot. Bottom line, the dash kit did work for my 2007 Dodge Caravan SE. I am giving this 4 stars because the fit seems a bit too tight and is affecting the CD bezel, but your deck may not have the same issue. Now I just have to wait for some nice spring weather to install the deck.
Christopher Greer –
Super easy to install
Customer –
This product for fitting into 2005 Dodge Ram works great. Excellent fit, easy to install.