Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
The Hi-Lift Handle-Keeper holds the Hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this jack stands in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.7 / 5
3,883 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
RoadGlider –
Forget what the other whiny dumb asses complaining about this have said about this not fitting without taking the top anchor point off the HighLift. Maybe it has been redesigned, but the one I received works like a champ and slides quite easily over the anchor point without having to remove anything. What boggles my mind is why HighLift doesn’t simply include this as part of the jack. It is a critical component if you ask me.The part is VERY well made and one heck of a huge chunk of rubber. I can’t stress enough how this is a must have.The one thing I will caution you on is that it is very easy to steal. This is easily countered by running a lock or cable through one of the holes in the jack ABOVE the point of the handle keeper so that it cannot be slipped off. Minor inconvenience, but you should have the jack secured with a cable anyways to prevent thieves from jacking your gear.
nnvjeeper –
Works well with one exception: this slides up or down the handle/jack very easily and thus may slide off while the jack is being transported on a vehicle. I must use a bungee to hold it in place so that it will provide a means to secure the jack handle. If you transport your jack in an upright position, this sill slide down and the handle becomes loose. If you transport your jack in the horizontal position (such as I do) this will slide either down the jack as in the upright position, or it will slide off the jack and handle, possibly to be lost on the road. So plan on somehow securing this plastic jack handle holder in place with some device, such as a bungee cord.
Curtis R. Martin –
I have a hi-lift mounted on the tailgate of my Jeep, and this is a great solution for silencing the incessant rattling. I’d previously used wire, cord, and briefly an elastic, all of which did a decent job, but this little gizmo is top notch. No rattle whatsoever after slapping it on, and it pulls off quickly and easily. Yes, it’s a total luxury item. No, no one “needs” this. But if you’re riding around with a hi-lift and you want to quiet it down, this does the trick quickly and perfectly. I’d highly recommend it for any off-road enthusiast!
Carlos –
Valio la pena, gracias, ojala salgan mas accesorios para poder escoger otra compra mas para tener mas artículos de compra.
DRbrtsn –
I am a little OCD when it comes to my gear and I am glad I bought this. It’s HD. Fits well. Does the job. Keeps the handle with the jack so it’s there when it’s needed. The last thing I need is to be stuck and have to hunt everything down to top it off or worse, it’s not in the truck. The cost is small and it is thick, tough and quality. You will only need to buy this once.
G Hill –
Exactly as advertised. Works well. I especially like the shape of the ‘rectangular’ hole because it fits over the bolt at the end of most jacks.
Ali J. –
Do not fit hte hi-lift jack 48′ i got which is very disapointing
Jorge Pantoja –
Producto de muy buena calidad y resistencia y fácil de instalar
Liam Crawford –
Good item strong.
George Riggs –
Fit well. Will work to keep handle and Jack together. Easy to remove handle. Great for my UTV.
Daniel Masnada –
Way better than the original style. Keeps the handle tighter and rattle-free and I can leave my clamp attachment on the jack now without removing it to take the isolated off. Used on my Badlands jack, so it should work on any off road farm/trail jack.
Hillbilly –
Was very tight and hard to get to fit with the handle, but after several a temps I got it to work.
Alexander B. –
The Hi-Lift Jack HK-B Black Handle-Keeper is an excellent accessory for anyone storing their Hi-Lift jack on their off-road vehicle. This small but mighty tool keeps the jack handle securely in place, preventing it from rattling or moving during your adventures.The handle-keeper is made of durable material, ensuring it can withstand the rigors of off-roading. It’s easy to install and fits perfectly, providing peace of mind that your jack is securely stored. No more annoying clanking noises or worrying about the handle coming loose.For anyone with a Hi-Lift jack, this handle-keeper is a must-have accessory. It adds convenience and security, making it a worthy investment for your off-road gear. 🚙🔧🛠️