Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Product Description
Carkio Go Kart Centrifugal Clutch 18 Tooth 3/4″ Bore #35 Chain Compatible with Mini Bike and Go Kart Racing
Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4″ Bore 18 Tooth #35 Chain
Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
Package Included: 1 x Go Kart Centrifugal Clutch 18 Teeth
Description
Description:
Product Name: Centifugal Clutch Mini bike go kart
Tooth:18
Shaft Bore : 3/4″
Chain model: #35 Chain
Size: Inner hole: Inner hole: 19.05mm, inch 3/4″, outer diameter 107mm, total height 55mm
Fitment:Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
Tip: Do not drain the oil in the clutch hole, the hole on the drum is to let the hot air out of the clutch. Do not spray oil in these holes. When oil enters the drum part of the clutch, it causes excessive slip, which means excessive heat is generated
The clutch needs to be lubricated, so oiling is very important, otherwise thermal damage will occur, which will be very dangerous. Regular oiling according to the usage
Where do you oil the clutch?Behind the snap ring, next to the sprocket teeth at the end of the clutch. There’s an internal bronze bushing behind the snap ring that requires lubrication
Note: This is Non original aftermarket Replacement Parts, please check the size and the pictures carefully for Compatible with before ordering it.
Vehicle information
Available fitment details
Listing compatibility notes
- Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4" Bore 18 Tooth #35 Chain Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
- Product Description Carkio Go Kart Centrifugal Clutch 18 Tooth 3/4" Bore #35 Chain Compatible with Mini Bike and Go Kart Racing Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3/4" Bore 18 Tooth #35 Chain Fitment: Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
- 05mm, inch 3/4", outer diameter 107mm, total height 55mm Fitment:Go-karts and Mini-bikes, clutch can mount inward or outward on crankshaft.
- There's an internal bronze bushing behind the snap ring that requires lubrication Note: This is Non original aftermarket Replacement Parts, please check the size and the pictures carefully for Compatible with before ordering it.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this clutches in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.5 / 5
103 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Sean Brown –
This is a great clutch for the price. I have it on a 224cc built engine on a mini bike and it has held up very well for the past few months. I keep it oiled to help it last longer. I would definitely buy it again
Katarzyna Kruczak –
I just used this clutch and the stock back sprocket with a 212(18lbs springs and governor deleted) and I got 60mph with good bottom end. It’s the perfect 4.0 gear raito for the cheapest price.
Youssef –
Just got it a week earlier than the expected delivery date witch is one huge plus! Just waiting for my wheel hubs to come in so I can try it out, will post pictures and update in a few days!
Richard Phillip Pomeroy –
I needed a clutch that would stop my mini bike from doing wheelies. This clutch stopped them. You get the speed on the top end. I went from 12 teeth to 18 teeth on the clutch.
Michael –
Solid clutch been beating on it for half a year. About a month ago started oiling the clutch behind the c clip before every ride to prolong the life would recommend
Oswaldo C. –
It will get you going & they do last but clutch has to much side to side play, doesnt fit perfect in the 3/4 shaft. This is causing the pin to damage. But its still gets me on the road tho. Until pins decides to leave the chat haha, pther than that its a good clutch if lube it as well. Just wish it fits perfectly in the shaft.
Jessica Verstrate –
The media could not be loaded.
Matthew –
This clutch is for high speed so be careful if you have a 65 tooth sprocket you gonna be going pretty fast. I got my go kart up to 54 mph with it but my acceleration was bad and it would slip a lot when climbing and acceleration.