Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Brand: Zombiebox
| Manufacturer |
Zombiebox |
| Brand |
Zombiebox |
| Model |
Slip On |
| Item Weight |
7 pounds |
| Package Dimensions |
14 x 14 x 4 inches |
| Item model number |
Slip On |
| Exterior |
Machined |
| Manufacturer Part Number |
Slip On |
This Zombiebox double wall insulated and silenced universal wall attachment kit provides a method of emitting the combustion exhaust out of your generator shed or enclosure. The thermally insulated exhaust pipe is 14” in overall length, long enough to go through thick exterior walls. The engineered wall plate prevents heat transfer by using only 2 contact points on the double wall muffler as well as using an air gap to reduce the amount of heat transfer. This provides more cooling between the muffler, the wall plate and the exterior wall. Thermal transfer to the wall is nominal so no extra materials or DIY engineering is needed. Simply cut a 5 inch hole in your shed or building wall, mount the plate on the outside, attach the adapter to the muffler, then connect the tube to the adapter. Insert the muffler into the wall mount, then connect the muffler to the flex tube.
Vehicle information
Available fitment details
Listing compatibility notes
- Prevents Carbon Monoxide buildup and shutoff problems in DIY enclosures Guarantee fit for Duromax XP13000E, XP13000EH, XP13000HX Made from industrial grade aluminized steel alloy, galvanized sheet metal and powder coated parts to prevent corrosion and rust.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this mufflers in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.2 / 5
181 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Fireslayer –
I bought this for a Honda EM6500SX, neither adaptor fit. Probably could have redone the screw holes but it would not have fit in the muffler well. So I took the original spark arrestor out and took it to a local welding shop. They were able to weld the adapter to the spark arrested. I had to grind down the adapter to fit in the opening but it all worked out well.
ronald embree –
Left the spark arrester on as it made a better flush fit. Put my exhaust out through the floor of my shed and got another pc of extension from Canadian tire to place on the end and point out the shed bottom. Have fired it up a few times and it sounds good and looks like it will stay together.
sweet –
Very disappointed with this purchase. Not only would it not fit to my generator but I had to alter the connection to my generator. No co leak there it leaks through the whole flex tube. My connection is air tight with high temp create a gasket. But now I probably can’t return this. It leaks co so bad all along the flex tube usless piece of garbage this kit is. This is the reason for buying this kit. To push the co out side. If I could give negative stars I would. Very very disappointed 😞
Brent Jenkins –
Product was perfect for what I needed. It extended the exhaust from our back-up generator and reduced overall noise level.Great product, easy to install, instructions were adequate.
keyoctave –
After upgrading my generator to one with more wattage, I had to do some modifications to my generator box. This product fit the bill nicely. The exhaust flange adaptor fit my Champion generator with no modifications needed. I purchased an exhaust manifold gasket to make a better seal between the generators exhaust outlet and the adaptor flange. I also took the muffler to a shop to have a 90 degree elbow welded onto it to direct the exhaust flow toward the ground. Nice quality product.
Kirk –
Easy install. The zombie box kit includes an adapter that fits right onto the Predator exhaust port with no modification needed. The wall mounting plate makes it easy to install into a DIY generator shed. Overall, very happy with the purchase.
Stéphane C. –
Amazing! Perfect fit with my Champion generator 8,000W. Easy to install and decrease the sound.
MJ –
I installed this to my Firman T07571 I bought from Costco and measured a significant sound level reduction. Without this muffler I measured a sound level of 108db next to the generator. After installing this muffler, I measured the sound level all around the generator and measured a sound level of 89db. I hear most of the noise is from the mechanical moving parts of the generator. I installed this to my shed and when I closed the door and measured the sound 20 feet away, I measured a sound level of 68 db.This kit also fits the Firman T07571 very well. I only wish this is available in stainless version.
CHI MINH PHI –
Beautifully constructed and effective.
Tim N. –
This was a good addition to my Generac power supply and it significantly reduced the exhaust sound. My neighbor’s will appreciate it if I ever have to run it continuously during a power-out emergency.
Richard M –
This works just as expected for my needs.
Chuck M. –
If you have an XP 13000 E-series generator, The ZombieBox solencer Slip On kit is posssibly missing one “tight space” part, the PATIKIL 90 Degree Mandrel Bend Elbow (1-1/2″ OD) in only 3.5 inches also available thru Amazon.com.
Ron G –
I was impressed that all the parts needed were included. The only issues I have with the design are that the hose could’ve/should’ve been at least 2 feet longer (6 feet would’ve been perfect.) Because of the short hose that’s included, the generator has to remain pretty close to the wall. The second issue is that there’s no covering over the end of exhaust that extends outside. That’ just an invitation for birds or bees to get in there and plug it up.