Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Brand: Ford
| Manufacturer |
Ford |
| Brand |
Ford |
| Model |
Ford XW7Z-9F924-BA Brake Repair Kit |
| Item Weight |
1.6 ounces |
| Product Dimensions |
8 x 8 x 8 inches |
| Country of Origin |
China |
| Item model number |
XW7Z-9F924-BA |
| Exterior |
Painted |
| Manufacturer Part Number |
XW7Z-9F924-BA |
| OEM Part Number |
XW7Z9F924BA |
Using Genuine Ford OE parts for repairs keeps your vehicle looking like new and can help maintain its value
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this brake kits in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.2 / 5
22 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
![Brake Kit for Buick Enclave, Chevy Traverse, GMC Acadia Limited, Saturn Outlook Brakes and Rotors Kit Front and Rear, Pads Replacement Drilled and Slotted [12.8' Front & 13.02' Rear Rotor]](https://imaginebroward.org/images/imagesall/images_0/images/I/71S/71SV5l4VHML._AC_SL500_.jpg)
Aurora60502 –
I bought the part for a 1998 Ford Windstar. Pressure switch fits fine into the master cylinder, but the wire harness jumper plug connection does not fit the 1998 Windstar harness. I had to cut the jumper and splice it into the existing wire harness. It was not a complicated job just an inconvenience. Everything worked fine after that.
The Reader –
It took me a long time and a lot of searching for this part but it works. Other names for this darn thing are brake pressure transducer, cruise control deactivation switch, and brake pressure switch. I have a 2004 Ford Freestar Limited with the 4.2L V6. The cord that came with it might work but I didn’t try to install it because the cord all ready on my van was attached to a couple of others and found it not worth my time to try and change it. It is a super easy part to replace as well. If your traction control light is on and the cruise control doesn’t work properly, this is what’s wrong.Take out your air filter assembly and you can see the part connected immediately beneath the master cylinder. Unhook the electrical connection on the bottom and unscrew the part 3/4 of the way with a monkey wrench. Brake fluid will start coming out so have the new part ready with a drop or so of new brake fluid on it. Unscrew the part and plug up the hole it goes in with a gloved hand while you get the new part. Screw in the new part and make sure it is tight but not too tight. Hook up the electrical cord and you are set. Don’t forget to put your air filter assembly back on as well 😉 If you can clear your C1288 ABS code, you can do it now as well. I hope this review helps because it was very difficult to find any help besides the expensive, roundabout dealership myself.
Rob –
This totally fixed the issue in my 2002 Windstar. No more brake light, no more leaking brake fluid, and now I can actually use the cruise control! Takes about 5 minutes to install.
Craig F. –
This item worked perfectly to fix the cruise control / speed control on my 2003 Ford Explorer Sport. I didn’t need the wire harness. Just the switch.
John Ashbridge –
This is the second Windstar/Freestar I have done this simple fix on. This eliminated a very annoying safety problem. Don’t get rid of your vehicle before you do this fix!
jm –
This fixed the cruise control on mt 2004 Sport Track – I only used the sensor – On the sport trac 2004 – the sensor wire disappears into wiring loom so i’m not sure if cable can be used. A bit expensive for using only 1/2 the kit, but saved me a 100/hr trip to the mechanic.
Scott –
Using a scan tool I pulled codes C1287 and C1288 on my 2005 Ford Freestar SEL 4.2 L, I had the “Trac Off” light on and no cruise control. Now both are fixed!I only needed the pressure switch (ironically not shown in the photo), the wiring harness was not needed and the zip tie will be used for something else. Read the review posted by “The Reader”, he gives installation instructions which were are right on for my vehicle. Five minutes and you’re done. Four stars because of the extra parts I didn’t need, but this set looks cheaper than buying the switch alone so maybe better.
Fluorida Man –
Picture only shows the adapter cable but it comes with the switch too. Appears to be genuine and it worked like a charm. 2000 Windstar 3.8
Vincent M –
The media could not be loaded.
Shirley –
Exactly what I needed – received in just a few days from shipper – recommend to anyone looking at this item