Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
| Manufacturer |
FIRSTINFO TOOLS |
| Brand |
FIRSTINFO TOOLS FIT YOUR NEEDS |
| Item Weight |
3.52 ounces |
| Product Dimensions |
7.48 x 5.51 x 0.2 inches |
| Country of Origin |
Taiwan |
| Item model number |
F3281C |
| Is Discontinued By Manufacturer |
No |
| Manufacturer Part Number |
F3281C |
| Special Features |
Original Patent Design |
| Voltage |
12 Volts |
Product Description
Tight Squeeze
- For removing bearings in narrow & tight spaces.
- The thickness of the hook is 1.2mm (0.047 inches) thin design makes it easy to fit the bearings.
Applicable Range
- Suitable for bearing dimensions: 1 to 3.1 inches (27 to 80mm) diameter.
- Fine threaded thrust screw with ball bearing tip.
NOT Apply Too Much Force
- DO NOT apply too much force, and use it evenly, or it will easily cause the hook to break.
- DO NOT attempt to use this tool forcefully.
Specification
- Designed construction for work on small-size bearings, gears, and bushes, used on a wide range of automotive and engineering applications.
Vehicle information
Available fitment details
Listing compatibility notes
- 【 Well Design for Easily Fitting the Crank Seal 】 Do NOT apply too much strength when using.
- The reason why the design of the thickness is thin is that easy to fit the crank seal.
- Manufacturer FIRSTINFO TOOLS Brand FIRSTINFO TOOLS FIT YOUR NEEDS Item Weight 3.
- 047 inches) thin design makes it easy to fit the bearings.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this tool sets in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.1 / 5
533 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
AJ –
This tool is very useful for Installing cam/crank oil seals. Makes it so much easier on Toyota Camrys 6cyl engines because the rear cam is very tough to get to and is very challenging to install the new cam seal. This tool will make it easier. As you can see in the images I posted, it’s very useful and comes with the necessary attachments. I will say that the instructions where a little vague and I kinda had to figure out how the tool works. So for anyone wondering, the blue cups are the ones that go first, then it’s the silver cups which are adapters to extend it. You can add as many Silver adapters as needed as I did. I also wanted to point out that I do not plan on using the remover tool because it seems flimsy. I use the Lisle puller instead.
ROBERT WAREING –
Just completed crank seal removal on my Kubota. This tool saved me tons of time and the aggravation of drilling holes iand putting in screws or fiddling with screwdrivers to pull seal out. A little pricey, but It sure works good. Seems to have durable contruction.
Cymru am Byth –
I bought this to remove seals and bearings. But it doesn’t work. It is a shame. I had high hopes for this. Firstly the legs aren’t as long as they claim in that you can’t pull over a shaft of over 3”. Next the legs are not toughened. So when you start pulling, the hooks on the legs straighten out. Rendering it useless. Don’t waste your time and money buying this item
johnny –
It might be fine if you’re working with seals that come out with ease but this product failed to work on a 2008 Acura TSX rear main seal with approximately 190k miles. Product comes with 2 sets of hooks, short and long. I was only able to use the short hooks because the shaft that you turn to pull the seal out isn’t long enough for the long set to work. The hooks bent out on me making this product useless. I did bend them back with pliers and made a 2nd attempt but the metal was already weakened and they bent out again.
Joel Johnson –
The arms are made of very cheap steel. Broke trying to pull first seal. Worthless
Patrick –
nickel très satisfait de mon achat
kadoo –
I used this on a seal much smaller than what the description calls for and it worked. I wish I had bought it earlier because I damaged a space and bearing trying to remove the seal the old fashion way.I am sure you can bend the prongs that you insert between the seal and shaft but with a little patience and finess these seals came right out. I would buy it again but this one should last me for my llifetime.
keith froias –
Not particularly strong metal. Due to that fact, tool was not very effective.
alm –
Perfect for what I needed
Lindsay Steele –
I had high hopes this tool would pull out the rear camshaft seal but the tips of the puller tool legs were not strong enough and they would break off.
Dennis reagin –
Tool worked like a champ. Advice on use; once you’ve “hooked” the seal with the arms and set the device up, take your time. Turn the handle until you feel resistance and stop. Wait for 30 or 40 seconds, then apply a little more tension. Do not “crank down” on it. Let it work. Repeat until you feel the tension gone on the handle.
Thomas –
Für kettensägen wellendichringe wechseln
Ted –
The smaller metal seal puller arms are not very strong or durable, one of the small arm tabs broke off while trying to remove cam seals on my 2005 3.3L Toyota Solara engine, I was very disappointed.The installer tool works without a problem.