Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Product Description
Effortless & Paint-Free Repairs
EWK Pneumatic Suction Dent Puller for 75-125mm Car Body Panel Dent Repair – EB0258
Instruction
Screw the suction cup onto the slide hammer and remove the protective cover.
Connect the air compressor to an air route with a suitable rated supply pressure.
Position the suction cup directly over the dent and apply gentle pressure, then activate the air valve.
Use the sliding hammer to pull out the dent. Please do not apply excessive force to the slide hammer.
Purchase Guidelines
- Please note that an air compressor, which is not included, is required for operating this product.
- When dealing with deep and stubborn dents, please use auxiliary tools as needed to complete the job.
- To maintain optimal suction power, ensure that the usage location is dry, clean, and oil-free.
- When handling larger dents, start pulling from the edges outward.
Vehicle information
Available fitment details
Listing compatibility notes
- 【3 Cup Sizes, For small to large Dents】One kit fits a wide range of vehicle dents!
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this dent removal tools in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.1 / 5
248 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Charbel T. Zgheib –
Hey gang this works with a compressor. Plug the compressor in and open the valve and there will be suction. Oh and clean the area off first. Simple physics. Great tool. The guy with the one star review and the video of him trying to get the dent out of the Mercedes. Sorry bro your car is a literal tank… And that dent is in the most precarious spot. It worked right away on my Silverado hood dent. I would try and wrap more weight around the pole and swing. Worst case scenario I would remake this took with a longer pole and bigger weight. It’s possible. But don’t fault the tool for not being able to get every dent ever.
Robert Delano –
I’ll update when replacement arrives.Arrived sealed in box, all looked good until I opened it. Pic #2 shows the black plastic piece on the back that was broken and #3 shows the green piece that was broken on arrival. I figured they didn’t really stop it from pulling this dent so I wasn’t going to leave a poor review but….1 pull, thing was working. 2 pulls, dent is coming along. 3 pulls and the air valve went flying. I guess it wasn’t screwed in all the way, screwed it in and proceeded. 6th pull, the metal air valve split (pic#4). Just fell apart…..and my review right now is this thing is garbage. I may have just gotten a bad unit though so I asked for a replacement. The dent did come out a little but there’s still a long way to go. Large cup was working, small cup didn’t hold even for 1 pull. Will update my review once the new one arrives.Update: new item sent, return was easy (UPS Picked up from my house). The new item arrived undamaged so I went right back to work on this dent. Unfortunately, there’s a dimple that’s preventing me from getting it completely pulled but I’d say we got 80-85% out. Large and mid cup work great, small cup didn’t do anything for me. Updated review from 2 stars to 4 for the above reasons. Next I’ll get to work on my daughter’s car….we’ll see I guess.
TR Brown –
Don’t want to give the wrong idea with only 3 stars as I do think this is a good tool but I couldn’t get my dent to pull despite repeated tries with all the different plungers. However, my dent was in a spot they indicate is a difficult pull so will try increasing the psi on my compressor to see if I can get a better hold and then revisit my rating.The quality of the tool is good with the only suspect area being the on/off valve switch which is a bit flimsy. For $100 it’s worth having in the shop and sure I can put it to good use.
Noni Yamake –
This product surprised me it pulled out almost all off my rear quarter panel. The large to medium cups work the best
Lonely guy –
This product is so well built, high-quality easy to use as described and shown! I am somewhat known on the tools in my shop as Tim Taylor, I love this tool’s Quality. absolutely no regrets I just love it
Customer –
Very easy to use I saw this used on a Motor Trend car program and checked Amazon and they carried it. I was able to remove several dents very easy.
Customer –
This thing is extremely strong works great
Gouda Ahmed –
تجربة رائعة! سرعة التوصيل كانت مذهلة والمنتج وصل بجودة ممتازة تمامًا كما هو موصوف. بالتأكيد سأكرر الطلب مرة أخرى. شكرًا لكم على الخدمة المميزة
T.G.Vaughn –
Great for pulling shallow dents in sheet metal.
Shiraz –
This is the product you need if you need to fix your car, the suction is amazing. Good product
Julie Neff –
Bad product doesn’t work and has no return options