Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
For S60H:
Color: Black
Measuring ranges: 0 to 600 bar & 0 to 8000 PSI
Pressure range: 60Mpa (600 bar)
For 6190/6200/6170 Diesel
Can test pressure: ≥35.0MPa (350 bar)
Fuel tank capacity: 4000mL
Oil Cup: 0.8L
Pressure: 0-60Mpa
Plunger Hole: 2/5”
Nozzle Connector: M14X1.5-M14X1.5, M14X1.5-M12X1.25, M14X1.5-M12X1.5
Applicable Models: Diesel engine vehicles
The nozzle tester consists of:
Aluminum cast injection pump operated with a hand lever.
Semi-transparent fuel tank with a 5-micron original Bosch Three-way shut-off valve.
Stainless steel, heavy gauge(100 mm Dial, 3/8 ” BSP thread).
Measuring ranges: 0 to 600bar & 0 to 8000 PSI.
Standard accessories:
Handle with handle
High pressure pipes ‘A’ and ‘B’ type with m.m. size nuts (12 X 1.5) and (14 X 1.5) for connections
O-rings-1 flat ring
Equipped with original Bosch piston / element, delivery valve and filter
For CR-C:
Produce Model: CR-C Common Rail Injector Tester
Testing Range: Automation, pilot, emission and full load condition.
Test Injectors: for bos-ch, for Den-so, and for Del-phi common rail injectors.
Power Supply: AC110V
Working Temperature: -30C°-70C°
Size: 110*250*190mm
Adjustable Width: 10 MS
Adjustable frequency: 30HZ
Package for S60H :
1 x Main Machine
3 x Fuel Bar
1 Set of Accessories
1 x Manual
Package for CR-C:
1 x CR-C Main Unit Machine
1 x Main Test Cable
1 x For Bos-ch Connector
1 x For Del-phi Connector
1 x For Den-so Connector
1 x Cable Clip connector
3 x Fuse
arnaldo –
Excelente para probar inyectores CR diesel
Donald castellanos –
Útil
Richard Jimenez –
This is a must have if you have a shop. We have used it several time and have tested injectors and found the faulty ones with this system. Works well! It has saved us time and money being able to confirm a injector is bad. Some of our equipment does not provide injectors to static test, only CP readings. Once a injector is pulled we can see pressure pop-off and a leaky injecotor. It is well worth the price. Quality is good and accrucey is correct.
Aaron –
Pump leaks and won’t hold pressure if you hold your tongue just right you can get 2000 psi( nowhere close to the 7000 my injectors require). Garbage do not spend you money on this
The Awning Hut –
This thing leaks so bad. It will not hold any pressure to test anything! The thing is made of plastic! The snap ring will not stay in place enough to pump it up. This thing so cheaply made. Now this seller is offering me NOTHING! AMAZON PLEASE HELP!