Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Anodized 6061 aluminum.
Tig welded construction.
Protects the engine and helps prevent frame damage.
This item fits the following vehicle applications:
compatible with Yamaha TTR125 2000-2004
compatible with Yamaha TTR125E 2003-2009
compatible with Yamaha TTR125L 2011
compatible with Yamaha TTR125L 2000-2009
compatible with Yamaha TTR125LE 2019-2022
compatible with Yamaha TTR125LE 2011-2016
compatible with Yamaha TTR125LE 2003-2009
Vehicle information
Available fitment details
Listing compatibility notes
- This item fits the following vehicle applications: compatible with Yamaha TTR125 2000-2004 compatible with Yamaha TTR125E 2003-2009 compatible with Yamaha TTR125L 2011 compatible with Yamaha TTR125L 2000-2009 compatible with Yamaha TTR125LE 2019-2022 compatible with Yamaha TTR125LE 2011-2016 compatible with Yamaha TTR125LE 2003-2009
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this frames in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.8 / 5
75 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
dualsportist –
We installed this on our 2004 TTR125 with the stock exhaust. It did fit BUT it required some grinding on the brace. With the stock exhaust the brace contacts the exhaust pipe near the head. The brace looks good and provides a better than stock skid plate. But it does reduce your ground clearance by an inch or so.It’s only adults that ride our TTR now, so we installed this brace. I can’t attest to whether the engine / frame layout is weak on the TTR125, as I’ve never seen a broken frame or engine case. But if you believe the online rant, you need this to save your TTR.
Themachineking –
The cradle an skid plate are great. Here are some things you might want to know. I had to take the exhaust loose an let it hang to get the front frame bolts out. You have to lay the bike on its side to do the job. When you take the original skid plate off the bike springs out a little (1/4 of an inch) so when your trying to line everything up to get the new bolts in you have to grab the front an the rear of the bike an pull it back together to get the bolt holes to line up on the front an rear of the cradle. The stock exhaust hits the cradle in the front. I didn’t notice until I had tightened everything up it’s not much an since I will be replacing the exhaust later I’m not worried about it. You could bend the exhaust out a little or do some grinding on the cradle if it bothered you.
JackofallMasterofNon –
Super high quality and rigid forged frame stiffener. This piece is a must, along with the chain guide, to ward off potentially catastrophic expensive failures. It bolts right on without any issue, it did not interfere with my exhaust. Gives priceless piece of mind if you want to get rough with your play bike. I hope this review helped you in your shopping decisions, if it was helpful please vote that it was. Thank you!
Jeff O. –
Had to work pretty hard to get the new bolts in.. alignment wasn’t perfect. Plus I wish the long rear bold came with a washer and a lock nut. Started digging into the aluminum of the cradle as soon as I started tightening it. It was hard enough getting the bolt to fit the first time, sucked taking it out to put a washer on it just to have to mess with it some more to get it back in.Other than that, it looks good and should serve its purpose.
Manda –
Seems solid, installation was easy took a half hour. (I would suspect if you frame is stretched allready it might be a problem) Did have to remove the exhaust to get it on and exhaust is against it but is holding a seal on outtake so not a worry. Only 4 stars because I would of liked it a bit wider. Overall will serve its purpose
Dserene1 –
Does the job. Good quality. Stock pipe needs a little persuasion to get around it but if you have half a brain you can make it work
crystalluvsmayhem –
Fits great, offers good engine protection over stock, bike frames will flex after years, requiring some finesse to install, a little patience and mechanical knowledge goes a long way. It was a nice upgrade to stiffen frame up
Larry Kelly –
Way easy to install. Took like 10 minutes. Excellent fitment, no modification needed, no need to remove exhaust. All the holes lined right up. 2001 TTR-125L. Quality construction and materials. Thank you BBR
Amy H –
This is a must have if you’re going to ride hard. We did have to file down the right side arm a little bit to clearance for the exhaust pipe. The instructions don’t even say anything about having to take the exhaust off, but you can’t even get the front bolts out without doing it. Overall, it’s a great product and I’m happy with the purchase.
scott fillmore –
It’s built well and should.add strength to the frame but hangs lower than it needs to and loses ground clearance. The bike will not longer for over a standard bike lift.Also, the instructions leave out steps like having to remove the exhaust to get to the bolts that need removed / re-installed. Plan on 1 hour or more.