Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Why to choose AUXLIGHT 1157/2057/7528 LED bulbs?
1.Brighter and Cooler color: super bright 6000K xenon white instead of dim yellowish color.
2.Dual-function for the brightness: high intensity light output for brake/turn signal light (1400 lumens), low intensity light output for tail/parking light/DRL (200 lumen).
3.Unique 360 degrees beam pattern design: 33 pieces 5730 LED chips are around the body of the bulb for maximum light output, 300% brighter than stock bulbs.
4.Making with high-quality materials: full aluminum material housing for quicker heat dissipation and the base applies flame retardant material to avoid the damage, increasing your driving safety.
5.10 minutes installation: compatible for both CK/SRCK and Standard socket, non-polarity, just plug and play.
Important Notice:
1.For some vehicle, you might need load resistors or flasher relay to prevent the hyper flash or no flash when the replacement for turn signal blinker lights, due to LED bulbs draw much lower power than halogens.
2.Please check the original bulb size before placing an order. Asking a question with your car model on “Customer questions & answers” if you are not sure which bulb will fit your car.
One-Year Warranty:
1.One year hassle free warranty, no hassle on return or replacement.
2.Any other problem please feel free to contact us, we are always here to fix the problem for you.
Vehicle information
Available fitment details
Listing compatibility notes
- Fit for 1157 2057 2357 7528 BAY15D 1016 1034 1034A 1034LL 1034NA 1035 1157A 1157ALL 1157LL 1157NA 1157ST 1178A 1196 198 2057A 2057ALL 2057LL 2057NA 2357A 2357ALL 2357LL 2357NA 2397 3496 7528L 94 etc.
- Asking a question with your car model on “Customer questions & answers” if you are not sure which bulb will fit your car.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this brake lights in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.3 / 5
187 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Alex Griffith –
Installed these in my 2006 Mazdaspeed6. On the vehicle these will induce hyperflash so you will need to have a parallel 6Ω of resistance for each turn signal bulb you replace. For my vehicle I installed a 3Ω 50W load resistor on each side in the rear of the car, which was enough to solve the hyperflash for all four lights. For the front bulbs (1157) the polarity was inverted from what I needed and since it’s a barrel style connector I had to work around it by snapping some tabs on the little bracket to allow me to rotate them to the correct polarity. There’s nothing to complain about on the bulbs themselves. They are bright but not overbearingly so and seem to be put together well. The color looks just right for a turn indicator and there is no visible flicker.
Krzysztof Jasiurkowski –
I got those bulbs because they supposed to have canbus inside it so I should required add another canbus but no good. They flicker all the time.
Customer –
The media could not be loaded.
Customer –
I purchased one type of Auxlight and tried it on a 2006 Jeep to make sure I didn’t have any electrical issues, and to make sure the brightness and performance was good. In this case better than the original incandescent. Everything worked very well.From there, I purchased all bulb replacements and stuck with the Auxlight brand to ensure continuity in components and electrical integration. Everything worked well.I also purchased dome lights to replace the original halogen. I’m not happy with the bright white and would prefer a softer color – maybe 4,500 or so. But the lights work very well, draw less energy, and there is no heat buildup.I had one problem with one of the light sets – the box was previously opened, torn and clearly returned. The lights did not work correctly, and I assume they didn’t work to begin with and were returned, restocked, and sent back out to me. This is an Amazon stock issue, not an Auxlight issue.Confident 5 stars on this brand.
A Customer –
These LED lamps are just what I needed to increase the visibility of my motorcycle. They dropped right in, very bright, making me more easily seen by others. Everything work just fine, no changes needed to the motorcycle.
kawardeep sidhu –
It’s easy to install & make the thing brighter. But, they got fused in short time.
Jean –
Bought for my classic car tail light/ brake lights. 1157 led red. Really happy with first impressions as far as brightness. Much improved over the old filament style bulb for classic cars. I only used in the rear lights so didn’t have to worry about flasher. It did speed up flashing a little for turn signal but I think that was a good thing more noticeable.
Ismael p. –
Lo que esperaba
Customer –
Don’t fit as they say