Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Atwood’s Surge Brake Actuators provide high quality fit and finish with a specially engineered design that creates more pressure at the brakes than typical in line actuator systems. Atwood’s surge brake actuators have a lock-out feature that allows use with standard hydraulic brakes for backing up. This means no need for specific free-backing brakes. For added safety, the surge actuator’s breakaway device will set the trailer brakes automatically should separation from the tow vehicle occur. This product is proudly designed, engineered, manufactured, and tested in the USA.
Vehicle information
Available fitment details
Listing compatibility notes
- All high grade steel design More pressure at the brakes means superior stopping ability No need for specific free-backing brakes 2 year limited warranty Made in the USA Atwood's Surge Brake Actuators provide high quality fit and finish with a specially engineered design that creates more pressure at the brakes than typical in line actuator systems.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this disc brakes in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.0 / 5
44 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Rob –
This is my second experience with the same product. This model hitch came with my Four Winns boat trailer from the factory. The first one was difficult to lock and release. The release tab was hard to move in either direction and the tab finally broke. I ordered a rebuild kit (just to get a new release tab) and found it impossible to install although I am an engineer and good with my hands. I resorted to purchasing an all new unit. It was easy to install but this one had the same problem with locking and releasing. It is not a smooth operation in either direction. I was finally able to use a flat bladed screw driver from underneath to pry the locking tongue so it engaged the ball. From underneath it did not take much pressure to move the tongue forward and then I was able to easily move the locking tab into place with very little force. This will be my standard practice from now on. Getting the tongue to release even after unlocking the tab is also problematic as it does not pivot out of the way when the tab is released. Raising the trailer tongue with the jack put upward pressure on the hitch and it eventually popped off suddenly. I did not try prying the hitch tongue back (which I will the next time). This same model hitch has been manufactured for at least ten years so you would think that all the bugs had been worked out. If you have an option, I would not purchase this hitch. I needed a direct, bot-in replacement so I went with it and had the same negative results. I noticed that Four Winns trailers do not use this model any longer. Finally, the paint on the brake cylinder is very poor. It started rusting before it ever got close to a body of water.
maxr –
Better product from the same manufacturer but with improved quality and a great price.!!Easy installation and all the hardware comes with it.
Diah in the Doah –
I bought this for the parts to rebuild a welded on actuator on my camper. It was cheaper to buy this and take all the parts off to use on my trailer. The parts worked great for my rebuild but I did need to make a new master cylinder gasket for my rebuild, but that is a small price to pay for saving $50+ over buying all the parts individually.
Antonio J. Cuva Jr. –
I ordered this for my brothers 30 year old car trailer & it works great & fit’s exactly like the original. My brother told me after he rebuilt the brakes on the trailer & put Dot 5 brake fluid in it it’s never stop like this when he first bought the car trailer. When I looked this up I used the original part # to get the exact one. I’d recommend this product it’s a good unit.
Tim Evans –
Great value, easy to install and bleed the brakes. It works perfect. Now I feel safe pulling my trailer loaded.
Waldo of Poway –
Good replacement. It is working well to tow my 4,000# tri-toon. Bolted right on, easy install.
Schon –
I only received the shell of the hitch, nothing else. It’s definitely a manufacturer issue, not Amazon. Atwood at its best….
Precision –
The top of the master cylinder does not seal properly and rain water runs into the brake fluid through the top bolt holes.Bad design as the lid of the master cylinder is the main frame of the the surge brake unit. Don’t forget to cover it with a trash bag to keep the rain out
Grant –
Delivered as promised in a very short time!