Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Quick decision
Review this sway bars in the context of the repair and the surrounding components.
(2) Front Sway Bar Links FITS 2WD Ford F-150 K80337 | Repair and Installation Guide
$31.99
800 ratingsSource: AmazonReview this component in the context of the repair, installation access, nearby parts, and the result the job is intended to achieve.
- FITS 2WD MODELS ONLY. PLEASE MAKE SURE YOUR VEHICLE IS 2WD BEFORE PURCHASING
- IF YOU ARE NOT SURE IF YOUR VEHICLE FITS, FEEL FREE TO ASK
- MADE IN THE USA PERFORMANCE GRADE “CODE RED” BUSHINGS
- SD Solutions” products incorporate proven design and engineering features High Performance + Higher Diameter Bar with Hardened Ball Joint Special Sway Bar Link “HEX” holding feature & flat cut to reduce damage to the ball stud during installation
- High Performance + Higher Diameter Bar with Hardened Ball Joint Special Sway Bar Link “HEX” holding feature & flat cut to reduce damage to the ball stud during installation
Product facts
Specifications
- Canonical product
- MP-US-B01JMVFJVC
- Source product ID
- B01JMVFJVC
- Category
- Replacement Parts / Shocks, Struts & Suspension / Sway Bars & Parts / Sway Bars
- Available images
- 8
Vehicle information
Available fitment details
Listing compatibility notes
- FITS 2WD MODELS ONLY.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Customer feedback
Ratings and written reviews
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
9 reviews for (2) Front Sway Bar Links FITS 2WD Ford F-150 K80337 | Repair and Installation Guide
Related products
-
TJ/LJ Lower Front Extended Sway Bar Tabs (Axle Side) by Metalcloak, Weld on Ready Bracket, Gusseted Strength, and Made in The USA | Repair and Installation Guide
$86.90 View details -
Sale!
Hellwig 7700 Solid, Heat Treated Chromoly, 1-1/8′ Rear Sway Bar | Repair and Installation Guide
Original price was: $538.91.$510.92Current price is: $510.92. View details -
Polaris OEM Rear Suspension Stabilizer Bar 2010-2011 Ranger 400 1016615-067 | Repair and Installation Guide
$101.35 View details -
Rear Suspension Stabilizer Bar 1016353-067 Replacement for Polaris Ranger 500 700 800 2009-2012 | Repair and Installation Guide
$59.99 View details
EAWreviews –
If you are not familiar with installation of these products, I strongly suggest watching a YouTube video. If you do not have enough jacks and jackstands to install these properly, I strongly suggest paying someone to install them. Otherwise, you will not get a good seat on the bushings and that will void your warranty.The quality of these versus OEM courts, is BHA far superior! When I removed my old ones, there was absolutely zero rubber bushings remaining.I did not realize my old ones were in such bad shape until about new tires and have them balanced and aligned. Thinking there was something wrong with the tires, because my steering wheel bounced like a basketball After getting my new tires put on. I had the balance checked and they were perfect. This prompted me to get up under my truck and I am mediately saw what the problem was.So if you were looking for some outstanding end links for your stress bars I cannot write a review good enough and long enough to say everything that needs to be said about these parts.But to sum it up, the quality construction of this is immediately visually obvious, any improvement on the stability and handling of my truck made it drive as well as it did when I first bought this truck in 2006! So I suggest spending a little extra money and getting these for your truck! You’ll be so pleased you didAnd yes, they look just like the pictures on the advertisement, maybe even a little better in person if that’s highly possible.
lew –
a little smaller in diameter than the original ones but worked fine.
Francisco Mata Villegas –
Quedaron exactamente por el modelo y marca!!
Matthew Garcia –
Found and installed these on my dads 08 2wd F150 5.4L, took about 1hr. Install was easy, 18mm nut for bottom of new one, and I think 14mm nut for top. Also need a 5/16 for the bottom shaft cause it’ll spin. Just helping the next guy save time. Most of the time was taking the old ones off. Feel real heavy duty and price was amazing. Recommend these to all who want a great End Link that lasts
Gil –
I used these links for 2005 Ford F150 XL 4.2l. They fit well and not too much hassle to install. Great quality at a great price…
El Puma Nica –
These are the best and incredibly quality. You will feel it when you drive your truck
Andrew M. –
Easy install, but you have to remove both sides and install concurrently
Codger12345 –
I bought some cheaper versions of these for about $10 cheaper and they were not the exact size as the OEM. These are exactly the same specs and size of the OEM and fit perfectly. Very happy will be buying in the future from this company.
John New –
Wonderful product and my sons 2007 F150xl reg cab handles like a sports car now compared to how it was handling before I installed them. I’m a factory trained certified auto technician that has always used factory parts. These are every bit of quality that the factory ones were and more.