Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Product Description
(BumpStep Sold Separately)
WeatherTech BumperTopper
Shield your rear bumper from damage.
Rear Bumper Protector
Safeguard your rear bumper from scratches, paint chipping, and everyday wear and tear with the WeatherTech BumperTopper. Made from an impact-resistant hard plastic, it stands up to damage. When it’s time to trade your vehicle in, BumperTopper also helps cover small scuffs and blemishes to protect value.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
-
Dry with a Clean Rag
It is important that the bumper remains free of any dirt and debris throughout installation.
-
Center BumperTopper
Center on bumper using character lines of your bumper aligning with Center Mark for proper placement
-
Hold in Place
Held in place on your bumper, outline the edges of it on your bumper with masking tape.
-
Once You Outline It
Use the included alcohol pads to deep clean the contact area, then let dry completely.
-
Grasp Adhesive Liner
Pull gently with one hand while applying light, even pressure with your opposite hand.
Installation Tips
-
How long must I wait after installing BumperTopper to drive my vehicle?
Waiting an hour or two will provide adequate adhesion for driving. Full adhesion takes up to 72 hours.
-
Can I install BumperTopper in winter?
Installation is recommended in temperatures 60 degrees or above, or inside a heated garage.
-
How thick is the BumperTopper?
The BumperTopper measures 3mm thick.
-
Is this BumperTopper car wash safe?
Yes. When properly installed, you can safely enter a car wash.
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Fits select 2017-2025 Chrysler Pacifica, 2021-2021 Chrysler Voyager, 2020-2020 Chrysler Voyager, 2017-2025 Chrysler Pacifica Hybrid Models.
- Please confirm fitment to your year, make, and model in imaginebroward.
- This rear bumper cover hugs the profile of your vehicle’s bumper for custom-fit protection.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this bumper guards in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.1 / 5
34 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Sunshine –
I purchased a used Pacifica and the bumper was already scratched. Basically the car showed the problem area. This bumper cover is not wide enough to protect the bumper where it’s going to get scratched. The Pacifica rear bumper has two areas where it turns down to shed water. The WeatherTech brand only accounts for one of the downward angles, the outer most edge, where the bumper is going to get scratched, is not covered by this product. I tossed my packaging thinking I could find a supplemental rubber piece to add to it but I can’t. Now I’ve got to strong arm this thing off my car to get a different brand. I wanted the WeatherTech brand to match my WeatherTech window vent visors. Now I have to figure something else out.
denis pinard –
Semble très près du couvercle de valise quand il est fermée.
Don Johnson –
Everything I wanted but wish it extender farther back to the edge of the bumper. That aside perfect and looks like it should be there.
Simge –
I used a lot of Weathertech products before and I trusted the brand so much, I didn’t read the reviews before buying. The protector does not cover the edge. I bought the protector especially for protecing the edge, since that is where the most scratches happen. Returning the product.
Kim Logan –
It fit perfectly no issues putting it on.
Robin East –
It was the perfect fit for the reason we needed it. I have to use a rolator which is a walker on wheels. Anyway putting it in and out of the car was scratching the paint and this was the perfect solution to save the paint!!
jim –
Nice fit looks great! Color is exact, hopefully it saves the door from dings.
Theodore P.Stafford –
Needs to cover the front edge of Bumper.
David Cohen –
I don’t know why car manufactureres dont build the car with a protected bumper. They know that lugging things in and out of the back hatch in this case of a Pacifica you are going to gouge the paint. This Bumper Topper eliminates the problem. It was simple to install and looks pretty good too.
Matt D. –
This cover fits exactly as I would expect it to. The installation instructions were easy to follow. It covers up some dings from wear on my rear bumper and hopefully will prevent future ones. It also looks great and you wouldn’t think it’s an after market product when looking at it.
Darlene Krause-clemence –
Fits perfect, looks great.