Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Product Description
HOTSYSTEM devotes to offering safe and smart energy, developing fashionable and creative electronics for global customers, focusing on improving customers’ on-line shopping experience.
These bulbs will have to be soldered to the PC board. You will have to completely disassembled the Cluster to get access to them. The blue socket can be discarded when using these bulbs.
Diameter: 10 x 4.7mm
Size：0.48in x 0.2in
Wire：0.98in
Operate Voltage: 12-14V, 1.4w
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this speedometers in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.4 / 5
338 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Brandon huseman –
If u want bulbs close to factory these are it perfectly bright and can’t beat the cost I used 3 for the burnt out bulbs in my factory head unit for my 2000 bonneville ssei and it took maybe 30 mins to do and they work perfectly better than paying $20 for 3 for oem and there the same brightness as oem I’m telling you they are more than worth it I even fixed my dad’s monsoon lcd in his 03 Hyundai Sante fe right after I fixed mine 🙂
Glenn W –
I used these to relight my radio controls for my steering wheel of my Buick LeSabre. They’re brighter than the originals, and makes the switch warm to the touch, but not to melting point. But I sure like having my illuminated switches back on. Some soldering skill was needed in my case, but worked fine. I just snipped the leads down to a good length before soldering in, about half the original length.
Electro Tech –
Correct size for my control, the blue color sleeves fit perfectly. I didn’t realize that there was another incondecent bulb for the red “temp increase” arrow…it takes a smaller bulb…I installed one of these bulbs there and used red nail polish to color the bulb and to dim that location. The light intensity of these bulbs are perfect. You just need to be comfortable desoldering these from the board and soldering in the new ones. The pic of the board has these already installed. The other pic shows size comparison of old vs new
Rob Ogrady –
My car horn got stuck on when I was trying to hook up an ammeter to find a possible parasitic draw draining my battery. I just couldn’t seem to maintain a steady connection and the voltage jogging seems to have messed up an alarm control module. My alarm and indicator chimes no longer work now. The horn relay was ok, and the horn switch wasn’t a part of the problem. So I installed an aftermarket horn switch and universal relay, making a new circuit for the car’s existing horn. But the new horn button needed to be illuminated so I soldered a homemade little light fixture to it, and soldered fine wire to the leads of one of the little 12 volt bulbs I bought from Amazon’s seller Hotsystems, sealed joints with heat shrink tubing, pulled the little lamp into the tiny light fixture, wired it into the parking light circuit and the bulb worked very well with a little blue rubber sheath over it. The little bulbs arrived to me on time and in good condition. This is the second order for these lamps from this seller that I have made. The first order was for heater control panel indicator lamps and they too are working perfectly.
Robin –
product good. used to repair my dashboard cluster
Suthana Tepraseuth –
Bulbs not suitable replacement for climate control panel for 2004 Toyota 4Runner. Too big
Miggy Smalls –
Great bulbs. Nice and bright for what I needed them for.
Ronnie Woods II –
Good replacement