Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Product Description
SX460 AVR – Automatic Voltage Regulator – Exact Generic Replacement
| INPUT |
Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1 |
| OUTPUT |
Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum |
| Regulation |
+/-1.0% |
| Unit power dissipation |
0.05% per deg. C change in AVR ambient. | Unit power dissipation: 10 watts maximum – Build up voltage：4 Volts @ AVR terminals. |
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this voltage regulators in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.4 / 5
84 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
jose a –
poor range in voltage. Not more 200v.
Customer –
Works just as expected!
Rudder2 –
I bought this to upgrade my old 1984 Onan 8.0kW MDKD GenSet. It works AWESOME! The voltage has never been so steady! I need to readjust it to be 120V because I originally adjusted it when the GenSet was cold. This is a note…Let the GenSet warm up fully then dial in the no load voltage. It didn’t drop much, 3V AC which isn’t bad for a 120V GenSet…117V is well with in acceptable tolerance but I want the no load voltage to be perfect.I can’t wait to install the remote trimming potentiometer. This will allow me to make a +/- 10% from original set point adjustment from the boat’s power panel without changing the main adjustment. I like this idea. Probably not get used much, if at all, but having the option there is GREAT.It use to have an old transformer regulator and it worked great till the GenSet got overloaded because of a failure in the Air-Conditioning on my boat, it kept trying to start the compressor and would go in to thermal shutdown then cool off just enough to try again but every time it tried it drew more and more power because the compressor was hotter when it tried with out popping the circuit breaker, even though it’s the proper size, and then it just didn’t work any more. I was sleeping at anchor in August in Southern Florida and didn’t notice the change in Generator tone till it was too late…Was too tired and slept too soundly that night. Oh, well, it made me upgrade it to this awesome board that holds a tighter voltage then the original ever did!
Blessing H. –
Excellent product, happy customer
Kindle Customer –
Low cost & it works
dan –
Groupe électrogène
david chamberlain –
fits perfect
Dan –
Easy install no problems!
george benedict –
I have used this on a old coleman generator took some wiring and a little research it works great so far 5000 watt runs most of my house during a power outage highly recommend putting fuses in line
Peter –
Planta electrica
Tacun –
Repuesto económico y me desvaro