Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Brand: S&S Cycle
| Manufacturer |
S&S Cycle |
| Brand |
S&S Cycle |
| Model |
S&S Cycle |
| Item Weight |
2.6 pounds |
| Product Dimensions |
10.5 x 5 x 4 inches |
| Item model number |
900-4065A |
| Is Discontinued By Manufacturer |
No |
| Manufacturer Part Number |
900-4065A |
| OEM Part Number |
900-4065A |
• Extremely durable rollers reduce valve side thursting with high lift cams• Superior wear and fatigue resistance even in the most demanding applications• 3/4″ long bushings provide 50% more bushing support area than 1/2″ long bushings• Eliminate the risk of engine damage associated with failed needle bearings• Clearance must be check when using stock rocker covers due to allowed production tolerances
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this rocker arms in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.7 / 5
13 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Brew –
Excellent product with great craftsmanship. I was looking for flaws but see none, these are in great shape! I’m switching over from Total Performance rocker arms to these S&S arms. It’s a must do to prevent any major failures of the TP brand due to bad alignment which causes wear and eventually failures on the valve train. I would recommend this upgrade to anyone. Great stuff!
Anonymous –
Put these in early, before your valve guides get worn. If you have high lift cams and tighter valve springs you need these. They prevent the valve guides from wearing excessively from the side force applied by regular rockers. They also have wider internal bronze bushings that last longer with the extra load of high lift and tight springs. Put them in right away before the wear occurs. You’ll be glad you did.
emel r rose –
good
Eric –
As advertised!
Richard C. –
great part, motor still in pieces .
Robert –
the oil hole is in the same place as stock, and like stock, doesn’t point in the right spot, still “clatters”.
Charlie Allen –
High quality, close tolerances, very pleased.
Hairbrainer –
Putting these into an EVO build with S&S 561 cam,HLT2 tappets, Axtell modified heads with springs for high lift. And Axtell 85” Iron cylinder kit.Using S&S billet rocker boxes.