Upgrade Vacuum-Rated Valve Core Removal Tool,2 Sizes 1/4inch and 5/16inch in 1 Tool,Mega Flow Vacuum-Rated Core Removal Tool,20 Microns Vacuum,Dual Head Valve Core Remover,For A2L Refrigerant | Repair and Installation Guide
$48.89
Rated 3.2 out of 5 based on 8 customer ratings
8 ratingsSource: Amazon
Review this component in the context of the repair, installation access, nearby parts, and the result the job is intended to achieve.
- What You Get: Package include 1pc Vacuum-Rated Valve Core Removal Tool, 1pc Dual Head Valve Core Remover, 12pcs valve core
- 2 Sizes in 1 Tool: You can easily interchange 1/4-inch standard service port fittings with optional 5/16-inch fittings. Compatible with R1234yf, R1234ze(E), R410, R22, R12, R407, R404, R32 air conditioning systems and more
- Grab Cores with Confidence: The stem tip can be tightened or loosened to accommodates various valve core sizes, providing a secure grip for easy removal and installation
- Double O-Ring Ball Valve Seal: Provides a leak-tight seal for precise vacuum testing, ensuring the system is free of contaminants before charging
- Wide Application: Valve core remover installer set designed for maintenance and use, compatible with air-conditioning, HVAC tech, gas furnace and refrigeration equipment
- Encouraging Smart Work: Magnetic cap allows for easy placement of the valve core set during service. You don’t need to stop the machine and release the refrigerant
Before you order
- Confirm the part number, position, dimensions, and connector details shown on this page.
- Compare the listing with the part currently installed on your vehicle.
Steve –
The media could not be loaded.
David Stone –
I’ve used this pink removal tool on mini splits and heat pumps and it does what it’s supposed to for the price. The seals are solid enough and it will hold down to about 50 microns in my testing, which is acceptable for basic jobs and for someone learning the trade. At roughly thirty dollars it is a reasonable backup or starter tool.The finish and fit are where you see the cost difference. The knurling is very aggressive and chunky, which gives good grip but can cause abrasions in tight spaces. The brass cap on the main body is not rounded and has sharp hex edges that can scrape when working in cramped panels. The stem action catches and isn’t as smooth compared with pro tools, and the core tip is shallower so you cannot narrow or widen the grip on cores as precisely. The magnet is smaller and weaker than the bigger brands, so stems are more likely to fall out when you set the tool down and is also more difficult to get it to stay on a vertical surface.The 1/4 inch ports are machined with a beveled flare edge rather than a smooth rounded seat. It still works but o rings do not seat as nicely, so you will need to tighten connections more or use Nylog blue thread sealant. I use Nylog on tool fittings anyway to avoid chasing small leaks and it speeds up the job.If you need a professional level of repeatable performance, smoother action, stronger magnet retention and better o ring seating, spend the extra and get the Appion. If you are starting out, building a spare set, or just need something that works without breaking the bank, this pink tool will get you by. Three stars because it is functional for the money but not finished or refined enough for daily pro use.
Zio –
This Upgrade Vacuum-Rated Valve Core Removal Tool is an absolute must-have for any HVAC technician. The dual-head design with both 1/4″ and 5/16″ connections in one tool is super convenient—no need to switch tools on the job. It’s built tough and performs flawlessly, even under demanding conditions.The mega flow capability and vacuum rating down to 20 microns make it perfect for high-performance evacuations, and it works great with A2L refrigerants. The valve operation is smooth and secure, and I’ve had zero leaks or issues during use.Whether you’re working on residential or commercial systems, this tool saves time, improves precision, and helps you get the job done right. I’ve used cheaper versions before, but this one is in a league of its own.If you’re serious about your work, add this to your kit—you won’t regret it.
MikeInOR –
I am not a pro. I am a do it myself amateur that balks at the prices the pros charge. I have installed 6 mini-split systems by myself and collected the needed tools along the way. For my use case this is a perfectly functional tool. For things like flaring tools I bought the premium Yellow Jacket eccentric flaring tool for R410a lines. For an occasional install I have not found a need for a high end expensive valve remover. If you aren’t in a rush to do a line evacuation you don’t even need a valve remover it is just slower and you have to run the pump longer. I have also done dry nitrogen pressure tests without a valve remover.If you are a pro and do this every day read the reviews from other pros and buy a tool that will last years in daily use. IF you are doing your own install this valve remover works fine and and there are other places to better spend money (buy a good eccentric flaring tool).
Ro –
Worked well for like 2 systems and leaks u der vacuum now.
Elites –
It Works.These are Drako-Myxx Upgrade Vacuum-Rated Valve Core Removal Tool,2 Sizes 1/4inch and 5/16inch in 1 Tool,Mega Flow Vacuum-Rated Core Removal Tool,20 Microns Vacuum,Dual Head Valve Core Remover,For A2L Refrigerant, with Magnetic cap.It worked for me. I’ve never used the more expensive ones but this one worked for my installation. I used only once so can’t say much about duribility but vlave core removed without any issue.