Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
LizardSkin 50115 Sound Control Ceramic Insulation – 2 Gallon
Vehicle information
Available fitment details
Listing compatibility notes
- About this item Country of Origin : United States Fit type: Vehicle Specific Package Weight: 25.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this insulation in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.5 / 5
94 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Customer –
Sprayed the interior of my 56 pickup. It is waaaaaayyyyy quieter and has a much higher quality ‘feel’ when you close the doors or go over bumps
CDT –
I was very impressed with the Lizard Skin product line. I used this on a 80’s vintage 4Runner and it really took out the “tin can” hollow sound and deadened the resonance. Road noise was dramatically reduced, but not wholly eliminated – its still a 30 year old truck . I used in conjunction with the ceramic insulation. Not cheap, but since I did the prep work for one – I felt it was worth doing both – and it works. Using tin foil to cover awkward things like the steering wheel, shifters, electrical connections etc, works well. I did tape / paper off the dash and glass. I noticed the insulation was more prone to misting / over spray than the sound control – it sprayed heavy like a bed liner. The project calculator on the Lizard Skin website was helpful and accurate in figuring out how much I needed. There is also an order of operation. Sound Control first, Insulation second (I allowed a 48 hr. cure time in between).This project started when I wanted to upgrade to a modern sound system and put in a new carpet. I have no regrets going with the spray over the foil backed mat style.
rupert –
works good
CaptnStoner –
I sprayed the Sound Control and Ceramic Coating in the cab area of my 86′ Toyota 4Runner.I used 2 gallons of each along with the applicator gun they sell. I started half way up my fire wall (because I didn’t want to remove my dash) and finished where the bed starts. I used all 2 gallons of the Sound, and had one gun hopper left over of the Ceramic.I removed the factory deadener using the dry ice and alcohol trick (worked Really well) and got a clean start. Lightly scuffed up everywhere I could and wiped out all the dust. The prep time took the longest to be honest, about 5+ hours by myself in 105 deg heat (not fun).Spray time was about 20 mins per coat and really easy to do. I did 2 coats of each and just followed the manufactures instructions.I did Dynamat in my last car and aside from prep, this was a lot more fun and I like the look of the end result better.As far as performance, the cab does sound a little quieter and the heat transfer seems to be less. This is an off road truck though so my main desire was to get the heat transfer down around the floor and overall sound less tingy which it seems to be doing that.I think with another 2 gallons I could do the side walls in the bed, front doors and hood to finish it out which I may do in the future. Maybe spray the headliner with the Ceramic.If you’re thinking of doing this, I highly recommend roping in a buddy or two to cut down on prep time!I give it 5 stars for now because it was super easy to apply, instructions were simple, customer service people I talked to were great, and the product is doing what I hoped for.
J. Pierson –
Getting the tinniness out of my classic truck is a priority and this product can get everywhere when sprayed. This liquid is very thick but sprays good when using a specialty gun. Easy water clean up makes it more pleasant to work with. Buy one with a large opening because filling the one offered has a bottle opening about 1.5″ which is way to small to quickly fill the bottle.After about 6-8 coats, my truck is noticeably more quiet inside and the doors sound like a high end modern car when closing. Of coarse that is something dependent on how well the inside of the door gets covered. This liguid will deaden sound if it get on the metal.
nicky nix –
Good product, easy clean up, don’t worry about a lot of over spray and water based so easy clean up, dries fast too..
Jason –
There’s plenty of videos on YouTube watch a few of them Some are better than others If you put the effort in Easy part is sprang it onI just wish it was cheaper$
roke vaillant –
Waited for way too long and when got product was broken and spilled all over, and lost most of product
MC –
Easy to use. Makes a huge difference.
Peter –
I used both the sound deadener and the ceramic insulation (thermal break). 2 coats of each. This product is NOT cheap. And having used hushmat and killmat before, I think they are better than the lizard skin spray. However, I also wanted the thermal break properties of the CI skin. And, that seems to work with about a 10 degree difference. So it is an effective thermal barrier. (I couldn’t find info on whether I could only use the CI, so I used both. It is particular about how to stir it, and its messy to use. I’ve painted cars before and this was rather messy with the pouring into the sprayer- cuz it’s on the thick side. Definately use an appropriate sprayer as it paints on like a milkshake. I added some hushmat and 3M insulation on top of the lizard skin and I’m happy with the results. I don’t recommend it as a stand alone product- but in conjunction with physical sound deadener, and insulation I think you’ll be happy with the results
rotomike –
Great stuff for sound deadening the inside of the car. Be sure to mask the area completely, you’d be surprised how far this travels Have also used as an undercoating.
GJM –
It’s thick. Had to thin with water. Worked fantastic for this application. Washes off with water and a soap…well in the spray gun I had to use mineral spirits because my gun was a cheaper household Wagner.
Randy Siler –
Opened the container and it was already solid and in gel form. Would not mix up and was like cake mix. I ordered and received this in July and didn’t open until September 17th bit it had never been opened before. Mixed it up, well tried for 25-30 minutes. Wouldn’t brake loose to even pour into the gun. That’s a lot of money wasted.