Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
- Product Dimensions
:
1 x 1 x 1 inches; 3.53 ounces
- Date First Available
:
November 13, 2024
- Manufacturer
:
Swilpool
- ASIN
:
B0DMV6R5XF
- Country of Origin
:
China
The Sleeve outside diameter is 1.02”;the Sleeve length is about 3” .
Crank Shaft Adapter Pulley kit is made of Stainless Steel 304.
Universal design, fit for most engine.
The crank shaft sleeve is constructed with durable metal and upgraded design which can extend service life of gas engine crank shafts.
Works with Engine Crank Shafts to enlarge the crank diameter and increase the shaft size to fit pulleys, gearboxes, etc. DIY install a Shaft Sleeve Adapter kit will help reduce the necessity of buying a new motor or pulley, to maintain existing components and speed/power requirements.
Vehicle information
Available fitment details
Listing compatibility notes
- Universal design, fit for most engine.
- Works with Engine Crank Shafts to enlarge the crank diameter and increase the shaft size to fit pulleys, gearboxes, etc.
Fitment data is provided as a buying aid. Verify the listing against your vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this crankshaft pulleys in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
2.8 / 5
4 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
Olin Christian –
Wasn’t t want it said it was.
Marcelo G. –
Good quality metal sleeve, had to work the key a little to make it fit but it works fine.
C –
As long as you were looking to adapt a 7/8 shaft to a one inch shaft you are in the right place. Depending on the application, you might need to beat it a little bit to get it in, but it will fit.I don’t know who needs to hear this, but you cannot adapt a three quarter inch shaft to a one inch shaft with a 7/8 to 1 inch adapter. I typically use these to adapt a brake kit I like to use. This worked perfectly fine for that.
OLE HACKER –
After installing the sleeve on the shaft it was too big to fit into the blade adapter. Had to machine down the OD of the sleeve at least .025 to get it to fit. Also key was too thick had to machine it down as well. A lot of extra work.