Description
Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.
Brand: FastCap
| Manufacturer |
FastCap |
| Part Number |
02159 |
| Item Weight |
4.6 ounces |
| Package Dimensions |
6.06 x 3.54 x 2.52 inches |
| Item model number |
02159 |
| Color |
Black |
| Material |
plastic |
| Item Package Quantity |
1 |
| Batteries Included? |
No |
| Batteries Required? |
No |
Product Description
The BeauClip is an easy fastener system for panels. The system is a secure, reusable, durable and effective way to prevent panels from slipping, falling and constantly being repaired.
Features
- Holds up to 6.8kg (15lbs) per clip
- Securely locks in place
- Simple to install
Stop struggling with inaccurate measurements, hook and loop, and complicated speciality tools. Great for panelling on boats, architectural woodwork, access panels, seat cushions, signage and much more!
No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.
Repair scenarios, installation, companion parts, and use outcomes
Buying guidance
Quick decision
Review this clips in the context of the repair and the surrounding components.
Repair scenario
- Identify the symptom and confirm that this is the component required by the repair.
- Inspect nearby connectors, fasteners, and mating surfaces before installation.
Installation notes
- Use the listing instructions when present and follow the vehicle service procedure.
- Professional installation may be appropriate when the repair requires special tools or calibration.
Companion parts
- Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
- Use the service procedure and the visible package contents to identify any additional parts or tools required.
Before you buy
- Compare the listing title, photos, package contents, and specifications with the part being replaced.
- Confirm vehicle compatibility and installation requirements before ordering.
Customer feedback
Ratings and written reviews
4.3 / 5
280 source ratings
Source: Amazon. Imported marketplace feedback is shown for product research and is not a review of a purchase made on this website.
tomgtv –
My boat builder used those cheap white screw in clips to secure panels. If you have to remove them theybreak off and leave a mess. I’ve used these before and they are easy to mount and hold the removable panelvery securely.They used to supply the screws. They use very small wood screws. So you have to buy them. I got one of thoseassortment boxes with like a zillion and there were plenty of the right size. You need the ones that mount flushwith a sloping head so that you have a smooth surface to mate with.
Christopher Osterman –
Not as large as they appeared. Which is great for boats. Just larger than a quarter. Very secure.Snap them together and play hadies getting them apart if not installed. Once installed the clip very easy, hold very well, and come apart some what easy. Wouldn’t want them to be to easy if they would blow away while Traveling. The 25$ cost for the clips and screws was cheap compared to the 460$ cost to replace the missing seat from the boat.Would have been a lot nicer if they came with stainless steel Screws. Had to buy at local hardware store. No big deal, but buy them online when you buy the beau clips. Great value and long overdue purchase.
david s. –
Works well but need to use No. 4 flat head screws as specified as tolerances are small. It won’t work with larger screws or No 4 flat head that are installed perpendicular. Use more clips than I think.. I needed one clip for every 12 inch to secure. Large 36×48 panel.
Mad Buzzard –
Do a great job. Make sure you use the correct size screw and I would put two in each side, that way you can make sure they don’t touch each other. If a screw protrudes or clashes with a screw on the opposite side they won’t clip together. Best put 2 on one side at 12 and 6 o’clock position, and 9 and 3 on the other.
Pauline S. –
I found this product really helpful for my padded headboard wall I did.
KH –
I wanted removable panels for a generator shed I made. I recessed them as to have almost no gap between frame and panel. Perfectly lining them up was fun, but that was mainly bc I was lazy after the entire project taking much longer than intended. I didn’t want the larger hole through the project exterior so my initial drill bits were small and just used to determine center. That being said, I then should have used a stop on the appropriately sized drill bits and a Forster bit vs a spade bit bc – based on my skillset in past projects – these would have been cleaner cuts that were appropriately square. Either way, it worked. I just made it a little more difficult than it should have been. Looks good now.
Hector Garcia –
High quality plastic.I used fastener to secure door panels on 1976 F250.Ingenious design.
karlee mcswain –
used these to attach my bow seats and they are extremely sturdy and can handle the rough waters
Elias –
Nice
Matt W. –
I used these clips to fasten upholstery and foam covered osb to the walls of my rv build. These don’t come with screws
Suzanne –
The media could not be loaded.
Jason Williams –
Strong connection when put together. Strong plastic, should last quite a while.
Customer –
They won’t clasp together and stay.