B-4.000 M-351C DH-9.500 4-Bolt Billet Main Iron Engine Block for Ford 351W Windsor | Repair and Installation Guide

Name: B-4.000 M-351C DH-9.500 4-Bolt Billet Main Iron Engine Block for Ford 351W Windsor | Repair and Installation Guide
SKU: C-B0D5HKYL9R
Price: 2699.99 USD
Availability: InStock

$2,699.99

SKU: C-B0D5HKYL9R Category: Long

Review this component in the context of the repair, installation access, nearby parts, and the result the job is intended to achieve.

Part Type: Engines, Bare Blocks
Cylinder Bore Diameter: 4.000 in.
Bore & Stroke: 4.185 in. x 4.125 in. Max Recommended
Cam Journal OD: Standard SBF – Can be bored to 55mm
Cam Plug: 2.375 in. Dia. Cup Plug
Cylinder Wall Thickness: 0.250 in. min @ 4.185 in. Bore
Deck Height: 9.500 in.

Deck Thickness: 0.675 in. Min
Fuel Pump: Standard Mechanical Provision
Fuel Pump Pushrod: Standard Length

Before you order

Confirm the part number, position, dimensions, and connector details shown on this page.
Compare the listing with the part currently installed on your vehicle.

Description

Review this item in the context of the repair, installation access, nearby parts, and the result the completed job is intended to achieve.

Freeze Plugs: Standard 1.500″ Press In Cup Plugs

Lifter Bores: Standard SBF .8757-. 8765″ Honed to Size

Main Bearing Size: 2.749 in. (Standard 351c)

Main Bearing Bore: Standard 351c

Main Cap Bolts: #1 1/2″ in. (2) 3/8 in. (2)

#2, 3, 4 7/16 (2) Splayed (2)

#5 1/2″in. (2) 3/8 in. (2)

Main Cap Press: 0.003-0.004 in.

Main Caps: All 5 Billet Steel. 3 Center Caps Splayed

Main Cap Register: Deep Stepped Register (No Need for Dowels)

Oil System: Wet Sump or SVO dry sump. Priority main oiling with external pump.

Oil Pump Shaft: Standard SBF

Oil Filter: Standard SBF

Oil Pan: Modified STD 351W Oil Pan

Rear Main Seal: Standard 1pc.

Serial No. Location: Right Front & Main Caps

Starter: Standard

Stud Holes, Head: 1/2″ std SVO with blind holes

Timing Chain/Gears: Uses stock 351w components

Timing Cover: Uses stock 351w cover

Torque Specs: 1 – 5 1/2″ in. Bolts 105ft. lbs.

2 -4 7/16″in. Bolts 65ft. lbs.

1 & 5 3/8 in. Bolts – 35 ft. lbs.

Quantity: Sold individually.

Notes: Check hood clearance before installing.

Calculator: CFM Calculator

Product facts

Specifications

Canonical product: MP-US-B0D5HKYL9R
Source product ID: B0D5HKYL9R
Category: Replacement Parts / Engines & Engine Parts / Engine Blocks / Long
Available images: 6

No structured vehicle fitment data is available. Compare the listing with the vehicle and existing part before ordering.

Repair scenarios, installation, companion parts, and use outcomes

Buying guidance

Quick decision

Review this long in the context of the repair and the surrounding components.

Repair scenario

Identify the symptom and confirm that this is the component required by the repair.
Inspect nearby connectors, fasteners, and mating surfaces before installation.

Installation notes

Use the listing instructions when present and follow the vehicle service procedure.
Professional installation may be appropriate when the repair requires special tools or calibration.

Companion parts

Inspect nearby fasteners, connectors, seals, fluids, and wear items before starting the repair.
Use the service procedure and the visible package contents to identify any additional parts or tools required.

Before you buy

Compare the listing title, photos, package contents, and specifications with the part being replaced.
Confirm vehicle compatibility and installation requirements before ordering.

Customer feedback

Ratings and written reviews

Reviews below were submitted through this store.

Reviews

There are no reviews yet.

Be the first to review “B-4.000 M-351C DH-9.500 4-Bolt Billet Main Iron Engine Block for Ford 351W Windsor | Repair and Installation Guide”